Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

how to display the displacement in micrometers

Please login with a confirmed email address before reporting spam

I have a problem in comsol 3.5a and 4.1 regarding my cantilever displacement.. it is showin 3.12 m instead of micro meters.. can anyone help me regarding this. how to view it in micrometers..

1 Reply Last Post 8 avr. 2011, 01:29 UTC−4
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 8 avr. 2011, 01:29 UTC−4
Hi

in which case ? in an eigenfrquency solver case ?, if so it's normal, the displacement in an eigenfrequency analysis are normalised, and have no absolute meaning. In V4.1 you can extract the mass matrix (settings of the eigenfrequency solver) in this way you normalise such that the square of the mass participation factors add up to the total mass, in this normalisation you have an information of the relative energy in the different modes, and you can check if you are considering enough modes.

Unfortunately, today COMSOL does only show the linear u,v,w mass participation factors, they have not normalised for the rigid body rotation (which add up to the respective inertias), but it's already a start ;) (does not exist in V3.5

If you are not in an eigenmode analysis it might be that you have missed the units and you are working in "m" instead of "um"

--
Good luck
Ivar
Hi in which case ? in an eigenfrquency solver case ?, if so it's normal, the displacement in an eigenfrequency analysis are normalised, and have no absolute meaning. In V4.1 you can extract the mass matrix (settings of the eigenfrequency solver) in this way you normalise such that the square of the mass participation factors add up to the total mass, in this normalisation you have an information of the relative energy in the different modes, and you can check if you are considering enough modes. Unfortunately, today COMSOL does only show the linear u,v,w mass participation factors, they have not normalised for the rigid body rotation (which add up to the respective inertias), but it's already a start ;) (does not exist in V3.5 If you are not in an eigenmode analysis it might be that you have missed the units and you are working in "m" instead of "um" -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.