Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Apply a load for Midlin plate
Posted 3 mai 2011, 16:26 UTC−4 Structural Mechanics 1 Reply
Please login with a confirmed email address before reporting spam
Hi,
I am new in Comsol. I have some problems with applying load (it has sinusoidal form). I compared the results with solution received by clasical theory and by improved theory. Can You help me find solution by Comsol too. I could not find , how I can give the load by function.
Thank You beforehand.
I am new in Comsol. I have some problems with applying load (it has sinusoidal form). I compared the results with solution received by clasical theory and by improved theory. Can You help me find solution by Comsol too. I could not find , how I can give the load by function.
Thank You beforehand.
1 Reply Last Post 3 mai 2011, 16:32 UTC−4
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi
If you have a harmonic (load sinus type) then you should consider harmonic solver or frequency domain solver, these are based on a harmonic signal development, you specify the amplitude , the frequency or frequency range ans sweep steps, possibly the phase, and you will get the rms values in response. Check the doc
--
Good luck
Ivar
If you have a harmonic (load sinus type) then you should consider harmonic solver or frequency domain solver, these are based on a harmonic signal development, you specify the amplitude , the frequency or frequency range ans sweep steps, possibly the phase, and you will get the rms values in response. Check the doc
--
Good luck
Ivar