Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Meshing Problem : Beginner "Acoustic Structure Interaction"

Please login with a confirmed email address before reporting spam

Hi everybody,

I've just started working on COMSOL MPH on an Acoustic/Structure Interraction. After repairing the geometry, i wanted to mesh it to know if it's well repaired, but i had several errors and warning due to narrow regions and small edges ... , the geometry is quit complicated so i wanted to know if i can have an advise please , just to help me start the work properly

Nb: I'm a beginner on the field

Thank you for your time


2 Replies Last Post 13 juil. 2018, 03:34 UTC−4
Riccardo Roberto De Lucia

Please login with a confirmed email address before reporting spam

Posted: 6 years ago 12 juil. 2018, 11:20 UTC−4

Hi, I am new to acoustics too. As far as I have understood, for FEM analyses, the general good practice is to start from a coarse mesh defined all over the model with maximum element size equal to at least one fifth of the wavelength of the fluid you are simulating in. Then you can refine the mesh for the structure to a finer level. Hope it helps!

Riccardo

Hi, I am new to acoustics too. As far as I have understood, for FEM analyses, the general good practice is to start from a coarse mesh defined all over the model with maximum element size equal to at least one fifth of the wavelength of the fluid you are simulating in. Then you can refine the mesh for the structure to a finer level. Hope it helps! Riccardo

Please login with a confirmed email address before reporting spam

Posted: 6 years ago 13 juil. 2018, 03:34 UTC−4

Hi Riccardo,

Thank you very much, this was very helpfull for me. I'll continue learning via the application library !

Have a nice weekend

Yasser

Hi Riccardo, Thank you very much, this was very helpfull for me. I'll continue learning via the application library ! Have a nice weekend Yasser

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.