Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

contact angle

Please login with a confirmed email address before reporting spam

hi friends,

How can we have different contact angle for a boundary ? I want that the contact angle change during the simulation and not to set a fixed contact angle for a boundary as it is available in wetted wall boundary condition.


best

1 Reply Last Post 22 juil. 2011, 12:38 UTC−4

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 22 juil. 2011, 12:38 UTC−4
If you have a function that defines the change in contact angle, you can set that. There are examples of this in the Microfluidics module (and possibly elsewhere).
If you have a function that defines the change in contact angle, you can set that. There are examples of this in the Microfluidics module (and possibly elsewhere).

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.