Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
simulating a moving body in a flowing field
Posted 1 oct. 2011, 07:17 UTC−4 Fluid & Heat, Computational Fluid Dynamics (CFD), Chemical Reaction Engineering, Mesh, Modeling Tools & Definitions, Parameters, Variables, & Functions, Structural Mechanics Version 4.2 1 Reply
Please login with a confirmed email address before reporting spam
I need to simulate flowing compressible or incompressible fluid in a circular pipe, containing solid bodies moving by the drag force deduced by the fluid. The diameter of the bodies is the same magnitude of the pipe diameter and of course something like particles simulation won't fit. In addition the bodys are aplying force against the flow field.
Any suggestions? please
thanks
roi
Attachments:
Please login with a confirmed email address before reporting spam
The task is extremely complicated and would require fluid dynamics, moving mesh and PDE interface. I would say it is possible with a lot of patience and accurate thinking.
First of all, you may want to check what is the value of your Reynolds number because I am not sure comsol may be able to handle this problem with turbulent flow.
Cheers