Menu

Discussion Forum

New Discussion
Filtrer

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Inductive Coupled plasma!

Posted 21 févr. 2012, 14:01 UTC−5 Plasma Physics, Fluid & Heat Version 4.1 2 Replies

Shahram Roshanpour
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hello!
I have a problem in the modeling of the source of plasma (high-frequency ionization).
Like I did everything correctly but still no results and gives an error message.
I tried many times and different options but useless.
Please help me solve this problem.
I have attached the files.
thanks a lot!
2 Replies Last Post 27 févr. 2012, 07:13 UTC−5
Daniel Smith COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 21 févr. 2012, 17:06 UTC−5
Hi, it doesn't look like you have assigned any material properties in the model. You need to right click on the Materials node and assign things like the relative permeability and permittivity for both the plasma and surrounding structure. See the example model called argon_gec_icp in the Plasma Module model library for an example.

/ Dan
Hi, it doesn't look like you have assigned any material properties in the model. You need to right click on the Materials node and assign things like the relative permeability and permittivity for both the plasma and surrounding structure. See the example model called argon_gec_icp in the Plasma Module model library for an example. / Dan
Shahram Roshanpour
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 27 févr. 2012, 07:13 UTC−5
Hi,
Thank you for answering.
I solved this problem, but got another problem!
program gives the following error message:
***
COMSOL Error
- Feature: Time-Dependent Solver1 (sol1/t1)
- Error: Failed to find consistent initial values.

Failed to find consistent initial values.
Las time steps is not converged.
***

I will be very thankful if you help me solve this problem!
thank you
Hi, Thank you for answering. I solved this problem, but got another problem! program gives the following error message: *** COMSOL Error - Feature: Time-Dependent Solver1 (sol1/t1) - Error: Failed to find consistent initial values. Failed to find consistent initial values. Las time steps is not converged. *** I will be very thankful if you help me solve this problem! thank you

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content