Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

How to Input 1000 Simple Supports for a Cantilever Beam

Please login with a confirmed email address before reporting spam

Hello everyone,

I am quite new to Comsol and trying to learn it using tutorials however I couldn't figure out something in a structural mechanics model and decided to seek your help. I tried to explain my problem in the picture attached. As you can see, I have a beam which is supported at 1000 locations by simple supports and carries a uniform distibuted load. The inputs that I know are the length/thickness and material properties of the beam and the x and y coordinates of the 1000 simple supports. The output that I want to get from my simulations is the normal force applied by the 1000 support points on the deformed beam. My first question is do I model these supports as a fixed constraint or prescribed displacement or something else? And my second question is how can I implement these 1000 support points automatically without having to enter the x and y coordinate of each one by hand? Is there for example a way to import a txt file containing the x/y coordinates of the supports into Comsol?

Thank you very much for your time and help in advance.

-David



0 Replies Last Post 27 août 2020, 23:29 UTC−4
COMSOL Moderator

Hello David Green

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.