Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
temperature of an expanding gas
Posted 6 juin 2012, 04:48 UTC−4 Fluid & Heat, Heat Transfer & Phase Change, Computational Fluid Dynamics (CFD) Version 4.2a 1 Reply
Please login with a confirmed email address before reporting spam
Hi,
I want to simulate the temperature of a gas due to expanding or compressing of the gas which flows though a channel with changing cross section. But I don't know with which module I can do this. Because all tutorials or examples I find the temperature changes not because of the expanding of the gas itself but because of a heat flux from outside.
So is it possible and what module do I need?
Thanks
I want to simulate the temperature of a gas due to expanding or compressing of the gas which flows though a channel with changing cross section. But I don't know with which module I can do this. Because all tutorials or examples I find the temperature changes not because of the expanding of the gas itself but because of a heat flux from outside.
So is it possible and what module do I need?
Thanks
1 Reply Last Post 6 juin 2012, 05:57 UTC−4
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi,
Comsol CFD has one example of diffuser:
www.comsol.com/showroom/gallery/10407/
It should be under models/CFD/High mach number flow.
Best regards
Tero
Comsol CFD has one example of diffuser:
www.comsol.com/showroom/gallery/10407/
It should be under models/CFD/High mach number flow.
Best regards
Tero