Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Four Electrode Method for Impedacne measurement

Please login with a confirmed email address before reporting spam

Hello~

I'm complete a new for COMSOL, but I have to use this for simulation.

Right now I am trying to measure the impedance of the object with 4 electrode method.

I used AC/DC module, Electric Current.

Basically I made 2 separate regions that have different conductivity.

and Put 4 small lines (electrodes), and make one of them terminal of current and one of them ground.

there is a option that I can find the impedance based on the current I put on the terminal

but I want to measure the voltage on other two electrode and measure impedance between them.

NOT the electrode I assigned as the terminal and ground.

I'm attaching the file I'm working on. there are 4 small line on the middle of the object and the two of them on the middle

have not been assigned anything.

Please help me to solve this problem. I really need to figure out this.

One more thing, is this possible to do the same thing in 3D mode? I think I have to improve this simulation in 3D later.

*** now I have file size error.. can't upload file.. what should I do..
I upload the spectrum picture to give basic Idea for what I'm doing..


1 Reply Last Post 26 janv. 2014, 09:53 UTC−5
COMSOL Moderator

Hello Choongsoon Kim

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.


Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 26 janv. 2014, 09:53 UTC−5
hello..i have same problem can you help me?thank you dear
good luck
mohammed abbas
hello..i have same problem can you help me?thank you dear good luck mohammed abbas

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.