Model Gallery

La Bibliothèque de Modèles présente des modèles construits avec COMSOL Multiphysics pour la simulation d'une très grande variété d'applications, dans les domaines électrique, mécanique, fluidique et chimique. Vous pouvez télécharger ces modèles résolus avec leur documentation détaillée, notamment les instructions de construction pas à pas, et vous en servir comme point de départ de votre travail de simulation. Utilisez l'outil de recherche rapide pour trouver les modèles correspondant à votre domaine d'intérêt, et connectez vous avec votre compte COMSOL Access, associé à une licence COMSOL, afin de télécharger les fichiers modèles.

NOx Reduction in a Monolithic Reactor

This suite of examples illustrate the modeling of selective NO reduction, that occurs as flue gases pass through the channels of a monolithic reactor in the exhaust system of a motored vehicle. The simulations are aimed at finding the optimal dosing of NH3, the reactant that serves as reducing agent in the process. Three different analyses are performed: Kinetic analysis: The example takes a ...

Porous Reactor with Injection Needle

This model treats the flow field and species distribution in an experimental reactor for studies of heterogeneous catalysis. The model exemplifies the coupling of free and porous media flow in fixed bed reactors. The reactor consists of a tubular structure with an injection tube that has its main axis perpendicular to the axis of the reactor. The incoming species in the main and injection ...

Packed Bed Reactor

One of the most common reactors in the chemical industry, for use in heterogeneous catalytic processes, is the packed bed reactor. This type of reactor is used both in synthesis as well as in effluent treatment and catalytic combustion. The reactor consists in essence of a container filled with catalyst particles. These particles can be contained within a supporting structure, like tubes or ...

Fully-coupled Physics with Joule Heating, CFD and Chemical Reactions

In this example, a fluid carrying several chemical components is pumped into a detector compartment. A wire in the center of the detector is heated through Joule heating, which is supposed to detect changes in density through convective cooling. However, the higher temperature around the wire causes the ignition of exothermic chemical reactions, which in turn increase the temperature even more. ...

Surface Reactions in a Biosensor

A flow cell in a biosensor contains an array of micropillars. The curved side of the pillars are coated with an active material that allows for the selective adsorption of analyte species in the sample stream. The adsorbed species produce a signal that is dependent upon the local concentration at the pillar surfaces. This example investigates the surface concentration distribution in the cell ...

Electroosmotic Flow in Porous Media

This example treats the modeling of electroosmotic flow in porous media. The system consists of a compartment of sintered porous material and two electrodes that generate an electric field. The cell combines pressure and electroosmotic driven flow. The equations that are solved are the continuity equations for flow velocity and current density together with a mass balance using the ...

Porous Media Flow

This model exemplifies the coupling between flow of a gas in an open channel and in a porous catalyst attached to one of the channel walls. The flow is described by the Navier-Stokes equation in the free region, and using the Brinkman equations in the porous region. The coupling of free media flow with porous media flow is very common in the field of chemical engineering. This type of ...

Chemical Vapor Deposition of GaAs

Chemical vapor deposition (CVD) allows a thin film to be grown on a substrate through molecules and molecular fragments adsorbing and reacting on a surface. This example illustrates the modeling of such a CVD reactor where triethyl-gallium first decomposes, and the reaction products along with arsine (AsH3) adsorb and react on a substrate to form GaAs layers. The CVD system is modeled using ...

Carbon Deposition in Heterogeneous Catalysis

Carbon deposition onto the surface of solid catalysts is commonly observed in hydrocarbon processing. Carbon deposits can affect both the activity of catalysts as well as the flow of gas through a catalyst bed. This example investigates the thermal decomposition of methane into hydrogen and solid carbon. In a first model the isothermal process occurring in an ideal reactor, simulated in with ...

Homogeneous Charge Compression Ignition of Methane - new

Homogeneous Charge Compression Ignition (HCCI) engines are being considered as an alternative to traditional spark- and compression-ignition engines. As the name implies, a homogeneous fuel/oxidant mixture is auto-ignited by compression with simultaneous combustion occurring throughout the cylinder volume. Combustion temperatures under lean burn operation are relatively low, resulting in low ...

Quick Search

1 - 10 of 54 First | < Previous | Next > | Last