Model Gallery

La Bibliothèque de Modèles présente des modèles construits avec COMSOL Multiphysics pour la simulation d'une très grande variété d'applications, dans les domaines électrique, mécanique, fluidique et chimique. Vous pouvez télécharger ces modèles résolus avec leur documentation détaillée, notamment les instructions de construction pas à pas, et vous en servir comme point de départ de votre travail de simulation. Utilisez l'outil de recherche rapide pour trouver les modèles correspondant à votre domaine d'intérêt, et connectez vous avec votre compte COMSOL Access, associé à une licence COMSOL, afin de télécharger les fichiers modèles.

Droplet Breakup in a T-junction

Emulsions consist of small liquid droplets immersed in an immiscible liquid and widely occur in the production of food, cosmetics, fine chemicals, and pharmaceutical products. The quality of the product is typically dependent on the size of the droplets. Simulating these processes can help in optimizing these droplets as well as other process variables. This model studies the volume mass ...

Inkjet Nozzle: Level Set

Inkjet printers are attractive tools for printing text and images because they combine low cost and high resolution with acceptable speed. Designers can vary several parameters to modify a printer’s performance. Simulations can be useful to improve the understanding of the fluid flow and to predict the optimal design of an inkjet for a specific application. Although initially invented to ...

Red Blood Cell Separation using Magnetophoresis

Particle Tracing is used in conjunction with magnetic fields and pressure-driven microfluidic flow to calculate the separation of red blood cells from blood plasma using magnetophoresis. An array of soft iron rectangles on either side of a microfluidics channel modifies the magnetic field induced by a pair of neodymium permanent magnets. The resulting strong gradients in the magnetic field ...

Jet Instability - Moving Mesh and Level Set Models

The Marangoni effect results in a slip velocity in the tangential direction on a fluid/fluid interface due to gradients in the surface tension coefficient. When the surface tension coefficient is constant, a two-fluid system may exist in static equilibrium. This is because the surface tension force may be exactly balanced by a jump in the pressure across the interface. The pressure is ...

Electroosmotic Micropump

Micropumps, especially those based on electroosmotic flow (EOF), are essential components in microfluidic lab-on-a-chip devices, as they contain no moving parts and are relatively easy to integrate in microfluidic circuits during fabrication. One major drawback in the conventional design of electroosmotic micropumps is the use of a high driving voltage. Therefore, the development of a ...

Electrokinetic Valve

This model presents an example of pressure driven flow and electrophoresis in a 3D micro channel system. Researchers often use a device similar to the one in this model as an electrokinetic sample injector in biochips to obtain well-defined sample volumes of dissociated acids and salts and to transport these volumes. Focusing is obtained through pressure driven flow of the sample and buffer ...

Electroosmotic Micromixer

Microlaboratories for biochemical applications often require rapid mixing of different fluid streams. At the microscale, flow is usually highly ordered laminar flow, and the lack of turbulence makes diffusion the primary mechanism for mixing. While diffusional mixing of small molecules (and therefore of rapidly diffusing species) can occur in a matter of seconds over distances of tens of ...

A Drug Delivery System

This example describes the operation of a drug delivery system that supplies a variable concentration of a water soluble drug. A droplet with a fixed volume of water travels down a capillary tube at a constant velocity. Part of the capillary wall consists of a permeable membrane separating the interior of the capillary from a concentrated solution of the drug. As the drop passes by the membrane, ...

Controlled Diffusion Micromixer

This model simulates an H-shaped micro-cell designed for controlled diffusive mixing. The cell puts two different laminar streams in contact for a controlled period of time. The contact surface is well-defined and, by controlling the flow rate, it is possible to control the amount of species that are transported from one stream to the other through diffusion. This example was originally ...

Electrowetting Lens

The contact angle of a two-fluid interface with a solid surface is determined by the balance of the forces at the contact point. In electrowetting the balance of forces at the contact point is modified by the application of a voltage between a conducting fluid and the solid surface. In many applications the solid surface consists of a thin dielectric deposited onto a conducting layer; this is ...

Quick Search

1 - 10 of 23 First | < Previous | Next > | Last