Technical Papers and Presentations

Ici vous trouverez les présentations issues des Conférences COMSOL à travers le monde. Réalisées par des utilisateurs de COMSOL Multiphysics, ces présentations explorent tous les domaines actuels d'innovation. Les applications couvrent pratiquement tous les secteurs industriels et impliquent des phénomènes électriques, mécaniques, fluidiques et chimiques. Utilisez la recherche rapide pour trouver les présentations les plus intéressantes dans votre domaine d'intérêt.

Transient Heat Conduction in Solids Irradiated by a Moving Heat Source

N.Bianco, O.Manca, S. Nardini, and S. Tamburrino
Università degli Studi di Napoli, Italy

Transient three-dimensional temperature distribution in a solid, irradiated by a moving Gaussian laser beam, was investigated numerically by means of COMSOL Multiphysics. Convection and radiation from the work-piece surfaces as well as variable thermophysical properties are accounted for.

Multiphysics Investigation of Thermo-optic Effects in Silicon-on-Insulator Waveguide Arrays

F. Magno, F. Dell’Olio, and V.M.N. Passaro
Politecnico di Bari

A theoretical investigation of thermo-optic effect in Silicon-on-Insulator (SOI) rib waveguides and waveguide arrays by means of the Finite Element Method (FEM) has been carried out. Both static and dynamic analyses have been performed.

Multiphysics Models of Biological Systems

S. Filippi[1,2], and C. Cherubini[1,2]
[1] Facoltà di Ingegneria Università Campus Biomedico di Roma
[2] International Center for Relativistic Astrophysics, University of Rome

This article presents different applications of COMSOL Multiphysics in the context of the mathematical modeling of biological systems. Simulations of excitable media like cardiac and neural tissues are discussed. --------------------------------- Keynote speaker's biography: Simonetta Filippi is member of the Engineering Faculty at the University Campus Biomedico and of the ...

Silicon-on-Insulator MOS Optical Modulators

F. Dell’Olio, F. De Leonardis, and V.M.N. Passaro
Politecnico di Bari

One of the most important requirements of any integrated optical technology is the ability to perform optical modulation, which permits to encode a bit stream onto the optical carrier provided by the laser source. In this paper a multiphysics model for silicon modulators adopting a Metal Oxide Semiconductor (MOS) structure is presented.

Design of Electro-Optic Bragg Amplitude Modulators

A. Secchi[1], V. Foglietti[1], E. Cianci[1], L. Pierno[2], and M. Dispenza[2]
[1] CNR-IFN, Italy
[2] SELEX-SI, Italy

The subject of this work is the design of a LiNbO3 electro-optic tuned Bragg filter to be used as an amplitude modulator. We analyze in detail the realized waveguide and simulate the grating, developing a fabrication methodology for building the Bragg modulator by niobate core etching. Finally, we evaluate the performance of the modulator, using the finite element method analysis.

A FEM Analysis of Transport Phenomena occurring during Vegetable Drying

S. Curcio
University of Calabria

The aim of the present work is the formulation of a theoretical model describing the transport phenomena involved in a food drying process by a convective oven. The proposed model represents a general and predictive tool capable of describing the real oven’s behavior over a wide range of process and fluid-dynamic conditions. The resulting system of non-linear unsteady-state partial ...

Coupling of Catalytic Endothermic and Exothermic Reactions by CPR

S. Vaccaro, G. Ferrazzano, and P. Ciambelli
Università di Salerno

Mathematical modelling of a catalytic plate reactor for methane steam reforming with COMSOL Multiphysics was carried out. The model reactor includes three channels where methane combustion occurs on the plates bordering the inner side of the outermost channels, whereas methane steam reforming takes place on the plates bordering the central channel.

Low Frequency Analysis of Small Rooms by Means of a Finite Element Model

P. Bonfiglio, and A. Farnetani
Università degli Studi di Ferrara

The main object of this paper is the determination of the impulse response, in the low frequency range, for calculating the reverberation time and the energetic parameters in this space. An absorbing material is modelled by using the propagation of sound waves in an equivalent fluid. The results of this Finite Element model are compared with experimental measurements of impulse responses ...

Diffusion Processes in the Human Brain using COMSOL Multiphysics

C. Cherubini[1,2], S. Filippi[1,2], and A. Gizzi[1]
[1] Università Campus Biomedico di Roma
[2] University of Rome

This article discusses the RMN import of a brain geometry in COMSOL Multiphysics via an interpolating function. The physical property associated with the grayscale is the diffusivity tensor, assumed here to be isotropic but inhomogeneous. Applications to anti-tumor drug delivery and cancer growth processes are discussed.

Cyclic Voltammetry Simulation at Microelectrode Arrays

A. Lavacchi, U. Bardi, S. Caporali, A. Fossati, and I. Perissi
University of Firenze

In the present paper we report the results obtained applying COMSOL Multiphysics to the numerical simulation of Cyclic Voltammetries (CV’s) at microelecrodes arrays. CV’s at inlaid micro disk electrode arrays have been simulated showing how the electrochemical response is affected by geometrical parameters such as the electrode radius and the distance among the electrode canters.

Quick Search

1 - 10 of 34 First | < Previous | Next > | Last