Understand Phenomena in the Viscous Catenary Problem via Simulation

Bridget Cunningham March 22, 2017

The viscous catenary problem is theoretically and experimentally significant in many industries due to the complex phenomena it entails. Simulation can help us understand this problem.

Lire la Suite

Bridget Cunningham March 9, 2017

In order to design superconducting magnets for a particle accelerator, such as the Large Hadron Collider at CERN, researchers need to simulate and optimize their electrothermal transients.

Lire la Suite

Nancy Bannach March 8, 2017

A simulation application, such as one for a thermoelectric cooler design, can be used to test a variety of parameters in order to optimize a device for a specific use.

Lire la Suite

Caty Fairclough March 6, 2017

To study a utility boiler furnace, you need to account for the effects of radiation, which is difficult to solve for analytically and study experimentally. That’s where simulation comes in.

Lire la Suite

Caty Fairclough February 23, 2017

To investigate a novel design for roof tiles that can keep buildings cool in hot climates, called Life HEROTILE Project, a research group from Italy turned to multiphysics simulation.

Lire la Suite

Peter Lyu February 13, 2017

We go over a comprehensive selection of porous media and subsurface flow interfaces available to you in the COMSOL® software so that you can find the right choice for your modeling objective.

Lire la Suite

Catégories

Bridget Paulus February 6, 2017

Microfluidic devices are no match for bubbles. In fact, if bubbles become trapped in a microfluidic device, it could malfunction. Veryst Engineering created a CFD model to study this process.

Lire la Suite

Ed Fontes February 2, 2017

Bacon-flavored vodka? Pecan-infused bourbon? The fat-washing process extracts the flavors from fat and dissolves it into alcohol, and it can even be scaled up to an industrial level.

Lire la Suite

Caty Fairclough January 31, 2017

When a supersonic flow turns around a convex corner, it causes an expansion fan. You can analyze this phenomenon in COMSOL Multiphysics® with a validated benchmark.

Lire la Suite

Magnus Ringh January 25, 2017

Pizza on the grill? It’s actually quite delicious. Here, we use heat transfer modeling to determine how the grill’s coals should be arranged for even heating.

Lire la Suite

Caty Fairclough January 19, 2017

In a keynote presentation from the COMSOL Conference 2016 Boston, Carl Meinhart from the University of California, Santa Barbara and Numerical Design discusses simulating transport processes.

Lire la Suite


Catégories


Tags

1 8 9 10 11 12 32