Multistudy Structural Optimization of a Bracket

Caty Fairclough | September 11, 2015

Weight reduction is a key design focus in many applications. This is particularly true in the automotive industry, where lightweight materials help foster the development of fuel efficient cars. Maintaining the structural integrity of these materials is, of course, an important concern. As we will show you today, simulation is a valuable tool for addressing this challenge.


Brianne Costa | September 9, 2015

Fluid dampers have a range of uses, from stabilizing skyscrapers to controlling fluid flow in microflow devices. Through a process called viscous heating, these dampers are able to dissipate mechanical energy into heat. Too much heat can cause damage to the damper, so it’s important to understand the viscous heating process when optimizing your fluid damper designs.


Categories

Walter Frei | September 7, 2015

When using the finite element method, we often want to model solid objects that are rotating and translating within other domains. The deformed mesh interfaces in COMSOL Multiphysics can be used to model these movements. In this blog post, we will look at the modeling of large linear translations and rotations of domains within other domains, while introducing efficient modeling techniques for addressing such cases.


Walter Frei | September 2, 2015

Modeling geometries with high aspect ratios can be one of the more challenging tasks for the finite element analyst. You want to have a mesh that will accurately represent the geometry and the solution, but you do not want too many elements, as solving your models would then require excessive computational resources. Here, we will look at using swept meshing to generate efficient and accurate finite element meshes in the context of some common modeling cases.


Caty Fairclough | August 31, 2015

Adjusting the focal length of a camera lens allows you to change your angle of view. Miniature lenses can achieve this change by using a method called electrowetting. Electrowetting involves changing the balance of forces at a contact point of a free surface and a solid by applying a voltage. However, focus is not obtained immediately due to oscillations in the free surface. Here, we investigate the optimal viscosity for critically damping the free surface when a voltage is applied.


Categories

Bridget Cunningham | August 26, 2015

Polymerase chain reaction tests have many applications within medical and biological research. In the past, these tests have been performed within a laboratory setting due to their high power requirements and the slow speed at which results are delivered. Researchers at the University of California, Berkeley have developed a new LED-based polymerase chain reaction system that, with its simplicity and speed, could be used in point-of-care testing.


Walter Frei | September 8, 2015

Good competitive paddling requires strength, timing, consistency, and teamwork. Initially, this may seem quite easy. Simply stick your paddle in the water and make the water go backward so that the boat moves forward. As it turns out, there are actually many different paddling strokes you can use depending on the situation.


Walter Frei | September 4, 2015

COMSOL Multiphysics includes two interfaces for manually defining the deformation of finite element mesh, the Deformed Geometry interface and the Moving Mesh interface. In this blog post, we will address when to use these interfaces and how to use them to efficiently model translational motion.


Bridget Cunningham | September 1, 2015

An important element in the design of any simulation app is organization. Maintaining an orderly structure makes it easier for you to build the app and also enhances the usability experience for app users. Today, we will show you how to create organized apps in COMSOL Multiphysics with the help of subforms and form collections.


Categories

Fabio Bocchi | August 27, 2015

Each year, tennis players from around the world compete at the U.S. Open, one of the oldest and largest tennis tournaments. With the 2015 tournament approaching, I found myself reflecting on my own experiences playing tennis, particularly how the feeling you get after hitting the ball is never quite the same. Is this simply a figment of the imagination or is there a physical answer? As I will explain here, so-called “sweet spots” can account for this feeling.


Andrew Griesmer | August 25, 2015

When a user running your COMSOL app finds a particularly interesting set of results, they might need to save their app so they can come back to it later. Without save options, you’d have to re-run the simulation later with the input parameters they gave you. That would be very inefficient and defeat the purpose of creating simulation apps. Today, we’ll show you how to add a file menu with save options in your app.


Categories

1 12 13 14 15 16 101