Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Micromixers, diffusion coeff and concentration
Posted 28 févr. 2017, 16:21 UTC+1 1 Reply
Please login with a confirmed email address before reporting spam
How to calculate the diffusioncoefficient and inlet concentration of sulphanilic acid, sodium acetate and blood in a micromixer.
1 Reply Last Post 28 févr. 2017, 19:56 UTC+1
Please login with a confirmed email address before reporting spam
Posted:
8 years ago
Hello Ferdina,
The following links illustrate usage of COMSOL for modeling micromixers:
www.comsol.com/search/?s=micromixer&subset=blog
www.comsol.com/search/?s=micromixer&subset=model_gallery
Models in that area are typically created with the Microfluics Module: www.comsol.com/microfluidics-module
If you are starting out with the software, working through some of the step-by-step tutorials included in the Microfluidics Module's Application Libraries will help you get up to speed.
Best regards,
Jeff
The following links illustrate usage of COMSOL for modeling micromixers:
www.comsol.com/search/?s=micromixer&subset=blog
www.comsol.com/search/?s=micromixer&subset=model_gallery
Models in that area are typically created with the Microfluics Module: www.comsol.com/microfluidics-module
If you are starting out with the software, working through some of the step-by-step tutorials included in the Microfluidics Module's Application Libraries will help you get up to speed.
Best regards,
Jeff