Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

How to derive capacitance matrix

Please login with a confirmed email address before reporting spam

I have a four core cable and I want to get the capacitance matrix over frequency.

I set the common screen to be ground and set the four cores to be different terminal, list them 1 to 4. and set them to be voltage terminal type with voltage of 1V.

I want to use parameter sweep of PortName. However, I am confused about how to define PortName in global parameter definition. I can give a name of PortName, but then what is the expression? I now set it to be PortName again and I get yellow warning. Simulation seems to run but I get nothing in result.

Another question is how can I get the result in a frequency range?

Thanks


2 Replies Last Post 3 juil. 2018, 21:20 UTC−4
Nirmal Paudel Tribhuvan University/Electrical Engineering

Please login with a confirmed email address before reporting spam

Posted: 6 years ago 27 juin 2018, 08:57 UTC−4
Updated: 6 years ago 27 juin 2018, 08:57 UTC−4

Hi,

The following blog post might be helpful here.

https://www.comsol.com/blogs/how-to-calculate-a-capacitance-matrix-in-comsol-multiphysics/

See also this application:

https://www.comsol.com/model/touchscreen-simulator-30841

Best Regards, Nirmal Paudel

Hi, The following blog post might be helpful here. https://www.comsol.com/blogs/how-to-calculate-a-capacitance-matrix-in-comsol-multiphysics/ See also this application: https://www.comsol.com/model/touchscreen-simulator-30841 Best Regards, Nirmal Paudel

Please login with a confirmed email address before reporting spam

Posted: 6 years ago 3 juil. 2018, 21:20 UTC−4

Thank you Nirmal

I solved the capacitance problem, but now I have difficulties in inductance. Can you help to take a look at my new post:https://www.comsol.com/forum/thread/181623/how-to-derive-inductance-of-the-3d-transmission-line-under-magnetic-field?last=2018-07-04T01:18:21Z

Thanks in advance.

Thank you Nirmal I solved the capacitance problem, but now I have difficulties in inductance. Can you help to take a look at my new post:https://www.comsol.com/forum/thread/181623/how-to-derive-inductance-of-the-3d-transmission-line-under-magnetic-field?last=2018-07-04T01:18:21Z Thanks in advance.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.