Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Refine mesh close to a point
Posted 19 mai 2011, 14:03 UTC+2 Mesh Version 4.1 2 Replies
Please login with a confirmed email address before reporting spam
Almost everything is in the subject: I have not found (yet) how to define the elements size in the vicinity of a point I have added inside the domain. Any idea welcome...
Alain Glière
Alain Glière
2 Replies Last Post 19 mai 2011, 15:57 UTC+2
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hello Alain,
Presuming that it's an unstructured simplex mesh you are using for the domain where the point is located, try right clicking in the Model Builder window on the Free Triangular node in question and adding a Size node and specifying the Geometric scope level to be Point. See attached screenshot.
Jeff
Presuming that it's an unstructured simplex mesh you are using for the domain where the point is located, try right clicking in the Model Builder window on the Free Triangular node in question and adding a Size node and specifying the Geometric scope level to be Point. See attached screenshot.
Jeff
Attachments:
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
exactly what I needed: many thanks!