Menu

Discussion Forum

New Discussion
Filtrer

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Boundary conditions in COMSOL 4.2a

Posted 5 juil. 2012, 19:00 UTC−4 MEMS & Nanotechnology, MEMS & Piezoelectric Devices Version 4.2a 2 Replies

Jose Ivan Nieva
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi, i have one simple question.
In the MES module (EMI) the boundary conditions chargue zero. Is the total chargue zero? Or no exist chargues?
I'm using a dielectric material in my model and need polarized of the dipole of the material.
2 Replies Last Post 9 juil. 2012, 14:49 UTC−4
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 6 juil. 2012, 03:23 UTC−4
Hi

check the underlaying equations, most BC applies to the field element value that is its locally "0", except for lumoed BC cases where the integrated value is "0"

--
Good luck
Ivar
Hi check the underlaying equations, most BC applies to the field element value that is its locally "0", except for lumoed BC cases where the integrated value is "0" -- Good luck Ivar
Jose Ivan Nieva
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 9 juil. 2012, 14:49 UTC−4
Thanks Ivar.
With reference to attach file, consider a dielectric mass with two electrodes fixed to its surface. This construction is held at some small distance from a second dielectric mass which we wish to control. Imagine two molecules in the target dielectric placed symmetrically about the mid plane of the diagram. Creating a potential difference across the electrodes gives rise to a fringing field which polarises these molecules. Since the electric field is non-uniform the forces acting on the the positive and negative charges are not quite collinear leading to a resultant force on each molecule F1, F2. By symmetry the total force on the pair of molecules F1 + F2 is downward (negative z direction).
The problem is that I do not get the mass movement. i'm checking the boundary conditions, but no obtain movement.
Thanks Ivar. With reference to attach file, consider a dielectric mass with two electrodes fixed to its surface. This construction is held at some small distance from a second dielectric mass which we wish to control. Imagine two molecules in the target dielectric placed symmetrically about the mid plane of the diagram. Creating a potential difference across the electrodes gives rise to a fringing field which polarises these molecules. Since the electric field is non-uniform the forces acting on the the positive and negative charges are not quite collinear leading to a resultant force on each molecule F1, F2. By symmetry the total force on the pair of molecules F1 + F2 is downward (negative z direction). The problem is that I do not get the mass movement. i'm checking the boundary conditions, but no obtain movement.

Attachments:

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content