Homogenized Multiturn causing tolerance issues

Please login with a confirmed email address before reporting spam

Hello,

I am currently simulating my model using the Coil Geometry Analysis study in COMSOL. When I select the Single Conductor option for the coil, the analysis runs successfully.

However, I would like to proceed with a Time-Dependent study, which requires using the Homogenized Multiturn coil model. Since I have already modeled all the turns explicitly in the geometry, I set N = 1. But when I switch to the homogenized multiturn option and run the Coil Geometry Analysis, the solver returns the error “Failed to find a solution.”

Could you please suggest how to resolve this issue?

Thank you for your support.



1 Reply Last Post 9 mars 2026, 09:49 UTC−4
Edgar J. Kaiser Certified Consultant

Please login with a confirmed email address before reporting spam

Posted: 4 hours ago 9 mars 2026, 09:49 UTC−4

You can run a time-dependent study with the single conductor coil.

-------------------
Edgar J. Kaiser
emPhys Physical Technology
www.emphys.com
You can run a time-dependent study with the single conductor coil.

Reply

Please read the discussion forum rules before posting.

Please log in to post a reply.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.