Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Adding a Rotating Wall in the Euler-Euler Interface
Posted 28 avr. 2026, 15:24 UTC−4 Computational Fluid Dynamics (CFD), Modeling Tools & Definitions, Physics Interfaces Version 6.3 0 Replies
Please login with a confirmed email address before reporting spam
Hello all,
I am trying to model a rotary tube reactor, where I am trying to model two phase gas-solid flow inside a rotating domain. I am using Euler-Euler for the two-phase flow and I have added a rotating wall to prescribe the rotary motion of the external wall.
A part of the geometry is as shown in one of the images. I want to rotate the outer wall and solve for the flow in the domain highlighted in blue. However, the Euler-Euler interface's wall setting does not include a place to enter or couple directly from frame the rotational component. Only the translational and sliding components are present.
Does anyone know why this is happening? Am I missing something or is there any other way to solve this?
Thanks!
Attachments:
Hello Shrieks08
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.
