Menu

Discussion Forum

New Discussion
Filtrer

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

COMSOL 4.0 : Scattered harmonic propagation no longer available?

Posted 14 mai 2010, 09:35 UTC−4 4 Replies

A R
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

In the previous version it use to be under RF Module -> Scattered harmonic propagation. But with 4.0, it is no longer there. Where is it?

thanks.
4 Replies Last Post 27 août 2010, 03:09 UTC−4
COMSOL Moderator

Hello A R

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Dustin Mathias
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 2 decades ago 26 août 2010, 16:51 UTC−4
I also cannot find this feature. I would like to know as well.
I also cannot find this feature. I would like to know as well.
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 2 decades ago 27 août 2010, 02:40 UTC−4
Hi

Have you checked the release notes for 4.0a, as not all features are already there for all physics, so probably its for next release :)

--
Good luck
Ivar
Hi Have you checked the release notes for 4.0a, as not all features are already there for all physics, so probably its for next release :) -- Good luck Ivar
Magnus Olsson COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 2 decades ago 27 août 2010, 02:46 UTC−4
Hi,

It is there all right:

Once you have set up an "Electromagnetic Waves" node in your model, you can select on the "Settings" tab for that node to "Solve for": "Full field" or "Scattered field".

Best regards,

Magnus Olsson
COMSOL

Hi, It is there all right: Once you have set up an "Electromagnetic Waves" node in your model, you can select on the "Settings" tab for that node to "Solve for": "Full field" or "Scattered field". Best regards, Magnus Olsson COMSOL
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 2 decades ago 27 août 2010, 03:09 UTC−4
That's true, it's there, too many places to look for ;)
but that's normal there are many parameters to control with MultiPhysics

Have fun Comsoling
Ivar
That's true, it's there, too many places to look for ;) but that's normal there are many parameters to control with MultiPhysics Have fun Comsoling Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content