Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Current Flow (Conductive Media DC)
Posted 3 août 2010, 09:27 UTC−4 Results & Visualization Version 3.5a 0 Replies
Please login with a confirmed email address before reporting spam
My Model has the following boundary conditions:
- Inflow Boundary with "inward current flow"
- Outflow Boundary with "electric potential"
- all the other Boundaries are "electrical insulated"
I want to calculate the "outward current flow" at the outflow boundary. But I am not sure, how to do this?
Is it correct to use "Postprocessing -> Boundary Integration" for the outflow boundary and with "normal current density" as predefined quantities?
It would be really nice if you could help me. Thanks in advance, Felix
Hello PleaseHelpUs
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.