Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
measure the stress in 2D and 3D model
Posted 11 sept. 2010, 06:42 UTC−4 4 Replies
Please login with a confirmed email address before reporting spam
Hello!
I am a new user of COMSOL, I have this model (under the message!) how could I measure the stress in every point Or is there any way to take this DATA as fife *.txt?
thanks.
I am a new user of COMSOL, I have this model (under the message!) how could I measure the stress in every point Or is there any way to take this DATA as fife *.txt?
thanks.
Attachments:
4 Replies Last Post 12 sept. 2010, 16:57 UTC−4
Please login with a confirmed email address before reporting spam
Posted:
2 decades ago
Hi
The most flexible way is top use matlab and read out the stress in the solved "fem" model structure. I see you use 3.4 so its an older version from before te forum was set up, but still, if you "search" there are a few threads on matlab extraction (and scripts thereof) on the forum
--
Good luck
Ivar
The most flexible way is top use matlab and read out the stress in the solved "fem" model structure. I see you use 3.4 so its an older version from before te forum was set up, but still, if you "search" there are a few threads on matlab extraction (and scripts thereof) on the forum
--
Good luck
Ivar
Please login with a confirmed email address before reporting spam
Posted:
2 decades ago
thank you for you reply,
Actually I find something but I am not sure about it!
I go to the menu :
postprocessing ->Domain Plot Parameter->Line/Extrusion then from the field Predefined quantities
I select the (Axial Stress) and if I select any Boundary Ex:2 and press Apply button a plot will appear (see the attaches file)
also I can save this value like .txt file. Is this the stress value!?
Actually I find something but I am not sure about it!
I go to the menu :
postprocessing ->Domain Plot Parameter->Line/Extrusion then from the field Predefined quantities
I select the (Axial Stress) and if I select any Boundary Ex:2 and press Apply button a plot will appear (see the attaches file)
also I can save this value like .txt file. Is this the stress value!?
Attachments:
Please login with a confirmed email address before reporting spam
Posted:
2 decades ago
Hi
that is correct, you can get a text file like that, you need to assemble it in several steps though, not very handy but for a one-shot probably quicker than to learn all the matlab stuff, if you do not use it often (note, if you are to switch to COMSOL V4 soon, I would say: do not use to much time on V3.5 and matlab interface, as things has changed quite alot, and you would need to "re-learn" a lot, I'm stuck in that situation).
Still V4 is cleaner and allows even more than 3.5
--
Good luck
Ivar
that is correct, you can get a text file like that, you need to assemble it in several steps though, not very handy but for a one-shot probably quicker than to learn all the matlab stuff, if you do not use it often (note, if you are to switch to COMSOL V4 soon, I would say: do not use to much time on V3.5 and matlab interface, as things has changed quite alot, and you would need to "re-learn" a lot, I'm stuck in that situation).
Still V4 is cleaner and allows even more than 3.5
--
Good luck
Ivar
Please login with a confirmed email address before reporting spam
Posted:
2 decades ago
thank you Ivar for your help, I will check my COMSOL verision!