Articles techniques et présentations

Recherche rapide

Ressources

Livres Blancs

À la conférence COMSOL 2025, des ingénieurs, des chercheurs et des scientifiques du monde entier ont présenté leur utilisation de la modélisation et de la simulation dans tous les grands secteurs d'activité et dans le monde universitaire. Utilisez l'outil de recherche rapide pour trouver une présentation spécifique ou filtrez par sujet ou par lieu d'événement.

ISBN: 978-1-7364524-3-1

Terme recherché:

2010 - Boston

Simulation of Laser-Material Interactions for Dynamic Transmission Electron Microscopy Experiments

B.W. Reed[1], T.B. LaGrange[1], G.H. Campbell[1], and N.D. Browning[1,2]
[1]Lawrence Livermore National Laboratory, Livermore, CA, USA
[2]University of California Davis, Davis, CA, USA

The Dynamic Transmission Electron Microscope (DTEM) at Lawrence Livermore National Laboratory is a unique instrument able to capture images of fast-evolving microstructure with exposure times of only 15 ns. This is more than six orders of magnitude faster than conventional in situ ... En savoir plus

Beam Structure As an Acoustic Wave Sensor: A Study of the Effect of Sensor Design on Its Sensitivity to Noise

F. Akasheh[1], A. Biddle[1], W.S. Shepard Jr.[2], and B.B.B. Zhang[2]
[1]Tuskegee University, Tuskegee, AL, USA
[2]University of Alabama, Tuscaloosa, AL, USA

The detection and identification of the location of a sound source is commonly done using arrays of microphones. A recent new alternative approach has been proposed which involves the use of continuous structures, such as beams or plates, as acoustic wave sensors. The sound wave ... En savoir plus

Heat Flux Predictions for a 3-D Compost Model

M. Teutli [1], Jiménez[1], Lozano[1], Peláez[1], J. Roque[2], and I. González[3]
[1]BUAP, Puebla, Mexico
[2]Universidad Veracruzana, Xalapa, VZ, Mexico
[3]UAM, Mexico City, Mexico

A 3-D model for compost was constructed taking as geometry basis a truncated cone, with dimensions of 4 m radius and 3 m height; in this structure an energy balance is applied for a two phase system (solid-air). Compost energy processes are modeled using COMSOL with a modified heat ... En savoir plus

Modeling of a Helical Coil Heat Exchanger for Sodium Alanate Based on-board Hydrogen Storage System

S. Kumar[1], and M. Raju[2]
[1]General Motors R&D Center, Warren, MI, USA
[2]Optimal CAE Inc., Detroit, MI, USA

Hydrogen refueling in a metal hydride based automotive hydrogen storage system is an exothermic reaction and hence an efficient heat exchanger is required to remove the heat for fast refueling. In this paper a helical coil heat exchanger embedded in a sodium alanate bed is modeled using ... En savoir plus

A Mixed Boundary Value Problem That Arises in the Study of Adhesively Bonded Structures

R. Malek-Madani, and J.J. Radice
US Naval Academy, Annapolis, MD, USA

The study of deformation of an adhesively bonded sandwich structure reduces to solving the biharmonic equation for the Airy Stress subject to mixed boundary conditions. Because of the nature of the boundary conditions, this boundary value problem does not yield to the standard elementary ... En savoir plus

Simulation of Heating Sol-Gel Thin Film By Laser Pulse Train

J. Zhang[1], Y. Mizuyama[1], W. Xiong[2], Y. Zhou [2], and Y. Lu[2]
[1]Panasonic Boston Laboratory, Newton, MA, USA
[2]University of Nebraska, Lincoln, NE, USA

Simulation of laser pulse-train (25ns, 60 kHz and 3000 pulses) heating Sol-Gel thin film using COMSOL Multiphysics software is investigated. The results show two kinds of temperatures formed on film surface by laser pulse-train heating. One is a single pulse induced transient peak ... En savoir plus

The Dissolution and Transport of Radionuclides From Used Nuclear Fuel in an Underground Repository

Y. Beauregard[1], M. Gobian[2], and F. Garisto[2]
[1]University of Western Ontario, London, ON, Canada
[2]Nuclear Waste Management Organization, Toronto, ON, Canada

In the Canadian concept for a deep geological repository for used nuclear fuel, the used fuel bundles are placed in containers consisting of an inner steel vessel surrounded by a copper shell. The filled containers are placed in excavated tunnels or boreholes and surrounded by a ... En savoir plus

MEMS Comb Drive Gap Reduction Beyond Minimum Feature Size: A Computational Study

N. Osonwanne, and J.V. Clark
Purdue University, West Lafayette, IN, USA

In this paper we present a method to reduce the comb drive gap in micro electro mechanical systems (MEMS) beyond the minimum fabrication feature size. The benefit of reducing the gap space between comb drive fingers is to increase its sensitivity to changes in capacitance due to ... En savoir plus

COMSOL Assisted Simulation of Laser Engraving

H. Karbasi
Conestoga College, Kitchener, ON, Canada

The main purpose of this paper is to develop a proof of concept software that can simulate the geometry of engraved surfaces and can estimate the depth and width of engraved groove and associated laser parameters. For this purpose, COMSOL has been used to simulate the moving laser beam ... En savoir plus

Drift-Diffusion and Ballistic Transport Modeling in III-Nitride Multiple-QW Light Emitting Structures

M.V. Kisin, and H.S. El-Ghoroury
Ostendo Technologies Inc., Carlsbad, CA, USA

COMSOL-based modeling software developed at Ostendo Technologies allows detailed simulation of semiconductor lasers and light-emitting diodes. In this work, we study the inhomogeneity of the carrier injection into optically active quantum wells of polar and nonpolar III-nitride light ... En savoir plus

Premier

1–10 of 120

Dernier

Articles techniques et présentations

Recherche rapide

COMSOL Conference 2025 Proceedings

Collection of Papers, Posters, and Slideshows Accepted by the Program Committee