- Bridging the Terahertz Gap
- Modeling the Lithium-Ion Battery
- Protection contre la Corrosion
- Modélisation des batteries
- Modélisation et Simulation dans le développement des piles à combustible
- Modélisation thermique des petits satellites
- Analyse électro-vibroacoustique d'un transducteur à armature équilibrée
Consultez les proceedings de la Conference COMSOL 2024
Three-dimensional finite element (FE) modeling of magnetic flux leakage (MFL) technique has been performed using COMSOL 3.4 for prediction of leakage fields from surface and sub-surface defects in a 12 mm thick carbon steel plate. The tangential and normal components of leakage fields ... En savoir plus
Recently adsorptive storage has been identified as the most promising low-pressure (3.5 - 4.0 MPa) alternative for storing natural gas for vehicular use. However in order to successfully implement this technology, the filling and discharge characteristics of the adsorbent bed must be ... En savoir plus
In this paper, a piezoelectric cantilever is investigated using finite element analysis made possible by COMSOL Multiphysics for the generation of electrical energy. A micro power generator was designed to convert mechanical vibrations present in the environment to electrical power. The ... En savoir plus
Ultrasonic Testing (UT) is one of the important Non-Destructive Evaluation (NDE) technique widely used for characterisation of materials as well as detection and characterisation of flaws present in the material used in various industries. There are many different important materials ... En savoir plus
Microheaters have been widely investigated because of their extensive applications in gas sensors, flow rate sensors and other Microsystems. The geometric optimization for the microheater was performed by simulating a wide range of possible geometries using COMSOL Multiphysics, a ... En savoir plus
Atherosclerosis in arteries is caused by the formation of stenosis : fatty depositions, on the artery wall. In current medicine, the practice is to observe the maximum percentage occlusion at any arbitrary cross-section and diagnose the patient on that basis, which might not always ... En savoir plus
This paper describes consecutive stages of design and construction of electromagnetic gun manufactured at the Silesian University of Technology. It gives insight into current knowledge about such a launcher. The computer model was elaborated in COMSOL Multiphysics version 3.5. The ... En savoir plus
High temperature superconductors (HTS) are promising candidates for electrical power applications. However, the superconductors exhibits energy loss known as AC loss when exposed to time varying external magnetic field and/or transport current. In this paper, AC loss in an elliptical Ag ... En savoir plus
Steam drum in a nuclear power plant is one of the important components of Primary Heat Transport (PHT) system where steam is separated from the steam water mixture. Steam water mixture emanating from the reactor core is separated in a steam drum. Separated steam goes to the turbine ... En savoir plus
Vibrations are an essential part of our day to day engineering environment, which happen in automobiles, avionics, machines, electric motors, structures, electronic equipments, etc. When a system is vibrating under higher frequencies leads to higher displacement, noise and heat ... En savoir plus