Articles techniques et présentations

A Voltage Controlled Resistor (VCR) is simulated by replacing the semiconductor channel of a MOSFET device by graphite and embedding Si nanoparticles near the insulator-channel interface. The change in output drain current is found to depend on the thickness and relative permittivity of ... En savoir plus

The subsurface thermal structure in presence of groundwater recharge/discharge has been obtained by applying the Robin type boundary condition at the earth’s surface. The Robin type boundary condition involves the effect air temperatures at the surface which are taken as exponentially ... En savoir plus

Fluid Structure Interaction (FSI) plays an important role in the seismic analysis and the design of Hydraulic structures. In this study, the acoustic finite element model is analyzed with impounded water considering appropriate boundary conditions between the water & the upstream ... En savoir plus

Magnetorheological Finishing (MRF) is one of the precision finishing processes in which magnetic field is used to drive abrading forces for Finishing 2D and complex 3D surfaces. In this paper, Ball End Magnetorheological Finishing (BEMRF) has been analyzed for fluid behaviors under the ... En savoir plus

Hydrodynamic flow focusing is an important requirement of microfluidic cell sorting devices. It allows the cells to arrive sequentially at the sorting location making detection easier. The simplest flow focusing configuration uses a three input Y-shaped microchannel. The sample enters ... En savoir plus

The flow morphology of two immiscible fluids in a microfluidic device finds numerous applications such as emulsification, synthesis of nanomaterials [1], lab-on-a-chip devices and biological analysis [2]. It offers many advantages over the conventional macroscopic devices because of its ... En savoir plus

In this work, we have developed a three-dimensional numerical simulation for blood flow through an arterial segment in the presence of an externally applied magnetic field. The study bears the potential applications in simulation-based medical planning system for cardiovascular disease ... En savoir plus

Electron beam has a wide range of applications in the material processing and joining techniques. Apart from that, it has also been utilized to simulate steady as well as transient fusion reactor relevant heat loads. Transient heat load events spontaneously occur in the fusion reactor. ... En savoir plus

Materials with an order variable in thermal conductivity as a function of temperature are desirable for thermoelectric heat energy recovery, building thermal insulation and solar thermal applications. Thermal Conductivity is an inherent material property. Engineering the fundamental ... En savoir plus

Conventional cardiac electrical signal monitoring and measurement techniques such as Electrocardiograph (ECG) are prone to operator error due to multiple lead attachment requirements. These multiple electrode based systems are also not convenient for continuous cardiac health monitoring, ... En savoir plus