Articles techniques et présentations

Recherche rapide

Ressources

White Papers and Application Notes

Ici vous trouverez les présentations issues des Conférences COMSOL à travers le monde. Réalisées par des utilisateurs de COMSOL Multiphysics, ces présentations explorent tous les domaines actuels d'innovation. Les applications couvrent pratiquement tous les secteurs industriels et impliquent des phénomènes électriques, mécaniques, fluidiques et chimiques. Utilisez la recherche rapide pour trouver les présentations les plus intéressantes dans votre domaine d'intérêt.

Consultez les proceedings de la Conference COMSOL 2020

All

Bengaluru 2023

Munich 2023

2014 - Cambridgex

Simple Disk Piezo Transformer Based Oscillator

J. P. Sandoz[1], J. M. Kissling[1]
[1]Institute of Applied Microtechnology, La Chaux-de-Fonds, HE‐ARC, Switzerland

In this contribution we present a COMSOL Multiphysics® example of a disk piezoelectric ceramic transformer (D-PT) coupled with a bipolar NPN transistor to form an auto-oscillator. The comparison between the simulations and the measurements made on our prototype are found to be in good ... En savoir plus

Virtual Prototype of a Dielectric Window for High-Power Microwave Tubes

A. Leggieri[1], D. Passi[1], F. di Paolo[1]
[1]Dipartimento di Ingegneria Elettronica, Università degli Studi di Roma Tor Vergata, Rome, Italy

This paper describes the Virtual Prototype of a Dielectric Window or High Power Microwave Vacuum Tubes and Linear Accelerators. Design formulas are provided and Computer Aided Design techniques based on COMSOL Multiphysics® software are proposed. The virtual prototype considers the ... En savoir plus

3D Acoustic Streaming Field in High-Intensity Discharge Lamps

B. Baumann[1], J. Schwieger[1], M. Wolff[1], F. Manders[2], J. Suijker[2]
[1]Hamburg University of Applied Sciences, Hamburg, Germany
[2]Philips Lighting, Turnhout, Belgium

High-intensity discharge lamps will in the foreseeable future be important light sources despite a growing market share of LEDs. Cost and energy efficient high frequency (300 kHz) operation is hampered by the excitation of acoustic resonances inside the arc tube, which results in low ... En savoir plus

Paleohydrogeological Reactive Transport Model of the Olkiluoto Site (Finland)

M. Luna[1], P. Trinchero[1], J. Molinero[1], J. Löfman[2], P. Pitkanen[3], L. Koskinen[3]
[1]Amphos 21 Consulting, Barcelona, Spain
[2]VTT Energy, Espoo, Finland
[3]Posiva, Eurajoki, Finland

The safety assessment of the deep geological repository for nuclear waste of Olkiluoto (Finland) requires the evaluation of the influence of the land uplift (ice withdrawal) in groundwater. With this objective in mind, we have developed a three dimensional reactive transport model of ... En savoir plus

Evolution of the Geochemical Background of an HLW Cell in the Callovo-Oxfordian Formation

O. Silva[1], M. Pekala[1], D. Garcia[1], J. Molinero[1], A. Nardi[1], M. Grive[1], B. Cochepin[2]
[1]Amphos 21 Consulting, Barcelona, Spain
[2]Agence Nationale pour la Gestion des Dechéts Radioactifs, Châtenay-Malabry Cedex, France

The French National Waste Management Agency (Andra) envisages the safe disposal of High-Level Waste Intermediate-Level Long-Lived Waste through deep geological storage (multibarrier). Waste storage is based on the Callovo-Oxfordian formation (CallOx). It has been updated a reactive ... En savoir plus

iCP 1.0: Stable Release Version of the Interface COMSOL-PHREEQC

A. Nardi[1], L. M. deVries[1], A. Sainz[1], J. Molinero[1]
[1]Amphos 21 Consulting, Barcelona, Spain

iCP (Nardi et al, 2014) is a software that couples two standalone simulation programs: COMSOL Multiphysics® and PHREEQC (Parkhurst & Appelo, 2013). The tool is ideal for applying multiphysics and geochemistry in Earth Sciences. Flexibility of the two coupled codes result in an ... En savoir plus

Numerical Study on Shear Horizontal Electromagnetic Acoustic Transducers for Generation of Ultrasonic Guided Waves for Absorber Tubes used in Concentrated Solar Plants

L. Cheng[1], A. Mohimi[1], M. Kogia[1], V. Kappatos[1], C. Selcuk[1], T.-H. Gan[1]
[1]Brunel Innovation Centre, Brunel University, Uxbridge, UK

Absorber tubes are one of the most critical components of parabolic trough Concentrated Solar Plants, which is very likely get damaged such as crack and mass loss. Therefore, the monitoring of their structural health via Non-Destructive Testing (NDT) techniques is regarded as essential ... En savoir plus

On the Influence of Cancellous Bone Structure upon the Electric Field Distribution of Electrostimulative Implants

U. Zimmermann[1], R.Bader[2], U. van Rienen[1]
[1]Institute of General Electrical Engineering, University of Rostock, Rostock, Germany
[2]Department of Orthopaedics, University Medicine Rostock, Rostock, Germany

Since the 1980s, the accelerating effect of electromagnetic fields on bone regeneration is used to treat complicated fractures and bone diseases. At the University of Rostock, an electrostimulative hip revision system is developed, basing on the method of Kraus-Lechner. This method ... En savoir plus

A 2D Model of the Flow in Hydrocyclones

B. Chinè[1], F. Concha[2], M. Meneses G.[3]
[1]School of Materials Science and Engineering, Costa Rica Institute of Technology, Cartago, Costa Rica
[2]Department of Metallurgical Engineering, University of Concepcion, Concepcion, Chile
[3]School of Production Engineering, Costa Rica Institute of Technology, Cartago, Costa Rica

Hydrocyclones are industrial devices used as processing units in fluid and particle technology. A hydrocyclone is an apparatus consisting of a cylindrical or a cylindrical-conical body with a tangential or involute entrance to admit the fluid inside. There are also two opposite exits, ... En savoir plus

Modeling of Expanding Metal Foams

B. Chinè[1,2], M. Monno[3]
[1]Laboratorio MUSP, Macchine Utensili e Sistemi di Produzione, Piacenza, Italy
[2]School of Materials Science and Engineering, Costa Rica Institute of Technology, Cartago, Costa Rica
[3]Politecnico di Milano, Dipartimento di Meccanica, Milano, Italy

Metal foams are interesting materials with many potential applications. They are characterized by a cellular structure represented by a metal or metal alloy and gas voids inside (Fig.1). A common metallic cellular material is aluminum foam which can be produced metallurgically by heating ... En savoir plus

Premier

31–40 of 205

Dernier