Consultez les proceedings de la Conference COMSOL 2020
Virtual Prototype of a Dielectric Window for High-Power Microwave Tubes
This paper describes the Virtual Prototype of a Dielectric Window or High Power Microwave Vacuum Tubes and Linear Accelerators. Design formulas are provided and Computer Aided Design techniques based on COMSOL Multiphysics® software are proposed. The virtual prototype considers the ... En savoir plus
3D Acoustic Streaming Field in High-Intensity Discharge Lamps
High-intensity discharge lamps will in the foreseeable future be important light sources despite a growing market share of LEDs. Cost and energy efficient high frequency (300 kHz) operation is hampered by the excitation of acoustic resonances inside the arc tube, which results in low ... En savoir plus
Paleohydrogeological Reactive Transport Model of the Olkiluoto Site (Finland)
The safety assessment of the deep geological repository for nuclear waste of Olkiluoto (Finland) requires the evaluation of the influence of the land uplift (ice withdrawal) in groundwater. With this objective in mind, we have developed a three dimensional reactive transport model of ... En savoir plus
Evolution of the Geochemical Background of an HLW Cell in the Callovo-Oxfordian Formation
The French National Waste Management Agency (Andra) envisages the safe disposal of High-Level Waste Intermediate-Level Long-Lived Waste through deep geological storage (multibarrier). Waste storage is based on the Callovo-Oxfordian formation (CallOx). It has been updated a reactive ... En savoir plus
iCP 1.0: Stable Release Version of the Interface COMSOL-PHREEQC
iCP (Nardi et al, 2014) is a software that couples two standalone simulation programs: COMSOL Multiphysics® and PHREEQC (Parkhurst & Appelo, 2013). The tool is ideal for applying multiphysics and geochemistry in Earth Sciences. Flexibility of the two coupled codes result in an ... En savoir plus
Numerical Study on Shear Horizontal Electromagnetic Acoustic Transducers for Generation of Ultrasonic Guided Waves for Absorber Tubes used in Concentrated Solar Plants
Absorber tubes are one of the most critical components of parabolic trough Concentrated Solar Plants, which is very likely get damaged such as crack and mass loss. Therefore, the monitoring of their structural health via Non-Destructive Testing (NDT) techniques is regarded as essential ... En savoir plus
On the Influence of Cancellous Bone Structure upon the Electric Field Distribution of Electrostimulative Implants
Since the 1980s, the accelerating effect of electromagnetic fields on bone regeneration is used to treat complicated fractures and bone diseases. At the University of Rostock, an electrostimulative hip revision system is developed, basing on the method of Kraus-Lechner. This method ... En savoir plus
A 2D Model of the Flow in Hydrocyclones
Hydrocyclones are industrial devices used as processing units in fluid and particle technology. A hydrocyclone is an apparatus consisting of a cylindrical or a cylindrical-conical body with a tangential or involute entrance to admit the fluid inside. There are also two opposite exits, ... En savoir plus
Modeling of Expanding Metal Foams
Metal foams are interesting materials with many potential applications. They are characterized by a cellular structure represented by a metal or metal alloy and gas voids inside (Fig.1). A common metallic cellular material is aluminum foam which can be produced metallurgically by heating ... En savoir plus
Three-Dimensional Thermal Modeling of Temperature Variation in Concrete Box-Girders Using COMSOL Multiphysics®
The COMSOL's Heat Transfer module was used in this study to evaluate the temperature distribution in concrete box-girders subjected to exterior thermal conditions. The included thermal loads were air temperature, wind speed in addition to solar radiation. Moreover, the reflected ... En savoir plus