- Bridging the Terahertz Gap
- Modeling the Lithium-Ion Battery
- Protection contre la Corrosion
- Modélisation des batteries
- Modélisation et Simulation dans le développement des piles à combustible
- Modélisation thermique des petits satellites
- Analyse électro-vibroacoustique d'un transducteur à armature équilibrée
Consultez les proceedings de la Conference COMSOL 2024
COMSOL Multiphysics® software is used to model a water tree in tape shield and concentric neutral cables. It allows for the effect on electric field intensity at the tip of the water tree and electric potential due to the water tree to be better understood. Also, COMSOL is used to ... En savoir plus
Spot laser welding is largely used in industrial manufacturing, especially in the case of small penetration depth. Unfortunately, welded joins are often polluted by porosities. The formation of porosities depends on complex thermo-hydraulic phenomena. During the interaction, a deep and ... En savoir plus
The current drive to go beyond the state of the art in novel near field scanning microwave microscope (NSMM) metrology at the micro scale, to make them capable of traceable measurements on functional materials, has led to the development of a finite element model of the probe of a ... En savoir plus
The adoption of micro- and nanostructured electrodes is a promising technique to improve the performance of Li-ion battery, which increases the electrode surface area and improves the efficiency of ion exchange between the electrode and electrolyte. This performance improvement is ... En savoir plus
The estimation of the soil saturated hydraulic conductivity (Ks) is crucial in understanding water flow and transport of contaminants. There are many hydrological techniques available in determining this parameter (constant head method, in-situ soil analysis, etc...). While these ... En savoir plus
We simulated the diffusion of calcium ions through a nanopore created in the cell membrane by electroporation, in presence and absence of the external electric field responsible of the membrane permeabilization. First we solved the set of coupled differential equations that describe the ... En savoir plus
Electroporation is an increase of the cell membrane permeability due to the formation of aqueous pores in it when the cell is under the influence of an intense electric field [1][2]. The formation of such pores in the membrane can be used to enhance the uptake of chemotherapeutic drugs ... En savoir plus
Here we aim to advance geomagnetic modeling approaches using COMSOL Multiphysics® software and improve the degree of detail that can be obtained from the measured magnetic field. First, we carried out benchmark tests by comparing the computed results using the widely used analytic ... En savoir plus
We have developed Thor: a pulsed power accelerator for performing dynamic material experiments. The design was aided by using the COMSOL Multiphysics® software with the AC/DC Module and RF Module. Our design process involved optimizing the impedance of the system while maintaining a good ... En savoir plus
Biosensors based on silicon nanowires are of great interest for ultrasensitive biomolecular recognition of disease specific markers for early stage diagnosis [1]. However, there are limitations on the performance of these nanosensors in solutions at high ionic strength. This is because ... En savoir plus
