- Bridging the Terahertz Gap
- Modeling the Lithium-Ion Battery
- Protection contre la Corrosion
- Modélisation des batteries
- Modélisation et Simulation dans le développement des piles à combustible
- Modélisation thermique des petits satellites
- Analyse électro-vibroacoustique d'un transducteur à armature équilibrée
Découvrez comment la simulation multiphysique contribue à faire progresser la recherche dans le monde entier grâce à des applications innovantes
La modélisation et la simulation multiphysiques stimulent l'innovation dans l'industrie et le monde universitaire, comme en témoignent les nombreuses applications présentées chaque année par des ingénieurs, des chercheurs et des scientifiques dans leurs articles techniques et posters lors des conférences COMSOL.
Inspirez-vous des travaux présentés lors des dernières conférences, rassemblés ci-dessous. Pour trouver une présentation en particulier ou affiner votre recherche par domaine d'application, année ou lieu de conférence, utilisez l'outil de recherche rapide.
Consultez les proceedings de la Conference COMSOL 2026
Finite element analysis (FEA) can be used to study the electrical properties of conductive ITO thin films. Previous studies have been done on insulating thin films deposited on conductive substrates [1,2]. It was found that changes of electrode size and film thicknesses can cause huge ... En savoir plus
In this work, the production intent design of a motor with controller inside a car seat for head restraint function is analyzed and optimized using the COMSOL Multiphysics® software and the Application Builder. Parameter based multiscale FEA models were developed by using external CAD ... En savoir plus
Column Loudspeakers employ multiple drivers to get close to a radiating line source. A line source gives several acoustic advantages versus a point source, especially in highly reverberant environments. This property particularly has made column loudspeakers the preferred solution in ... En savoir plus
The objective of the research is to design a broadband energy harvester device through the two-piece non-linear trapezoidal geometry approach. The performance of two piezoelectric PZT-PZN polycrystalline ceramic composition samples are simulated in the COMSOL Multiphysics® software, and ... En savoir plus
MEMS Pressure sensors work on the principle of mechanical bending of thin diaphragm under applied load over diaphragm area. The sensitivity of diaphragm is crucial to efficiency of the sensor. It is defined as the increase in deflection of diaphragm as a result of increase in pressure ... En savoir plus
The U.S. Army Engineer Research and Development Center (ERDC) is conducting research using infrasound arrays to detect and monitor structures as well as for dynamic structural characterization of large infrastructure. Previous studies have determined that structures radiate acoustic ... En savoir plus
Acoustic metamaterials commonly use Helmholtz resonators to attenuate an acoustic signal at the resonator’s resonance frequency. The resonance frequency is only dependent on the geometry, which is shown by representing the Helmholtz resonator as a mass spring system using the lumped ... En savoir plus
Vibrations and noise of high power transformers have attracted considerable experimental and theoretical interests over last few years [1, 2]. For such transformers operating under high voltage (~ 100 kV) and power (~ 100 MVA), noise generated is significantly attributed to load noise ... En savoir plus
