Articles techniques et présentations

Recherche rapide

Ressources

Livres Blancs

Voyez comment la modélisation et la simulation sont utilisées par les industries La modélisation et la simulation multiphysiques pilotent l'innovation dans tous les grands secteurs d'activité et dans le monde universitaire — comme en témoignent les nombreuses utilisations présentées dans des articles et des posters techniques présentés par des ingénieurs, chercheurs et scientifiques à la Conférence COMSOL chaque année. Inspirez-vous des récents proceedings réunis ci-dessous, ou, pour trouver les présentations les plus intéressantes dans votre domaine d'intérêt, utilisez la recherche rapide.

Consultez les proceedings de la Conference COMSOL 2024

Toutes

Boston 2025

Amsterdam 2025

Terme recherché:

Acoustics and Vibrations

Analysis of Sound Propagation in Lined Ducts by Means of a Finite Element Model

D. Borelli[1] and C. Schenone[1]
[1]DIPTEM, University of Genova, Genova, Italy

The present paper describes the results of a Finite Element Model used to analyze sound propagation in lined ducts. By means of a numerical model it was possible to predict the insertion loss inside rectangular lined ducts in a frequency range from 250 Hz to 4000 Hz. The model was ... En savoir plus

Study of an Electroacoustic Absorber

A-S. Moreau[1], H. Lissek[1], and R. Boulandet[1]
[1]EPFL-STI-IEL-LEMA, Ecole Polytechnique Fédérale de Lausanne, Lausanne, Switzerland

In this paper, the underlying concept of electroacoustic absorbers is studied with the help of Comsol Multiphysics® Acoustics Module. Among the different ways to obtain variable acoustic properties on an electroacoustic transducer's voicing face, there is the shunting of the ... En savoir plus

A Novel FEM Method for Predicting Thermoacoustic Combustion Instability

G. Campa[1] and S.M. Camporeale[1]
[1]DIMEG, Politecnico di Bari, Bari, Italy

Modern gas turbines suffer of the phenomenon of combustion instability, also known as “humming”. The main origin of the instability is considered to be related to the interaction between acoustic waves and fluctuations of the heat released by the flame. This paper presents a ... En savoir plus

Accuracy of Fully Coupled Loudspeaker Simulation Using COMSOL

M. Hedges[1][2] and Y.W. Lam[1]
[1]Acoustics Research Centre, School of Computing, Science & Engineering, University of Salford, Salford, United Kingdom
[2]Monitor Audio Ltd., Rayleigh, Essex, United Kingdom

Loudspeaker simulation is used to inform the designer as to the performance of a design. In recent years the Finite Element Method (FEM) has been used to model the mechanical and acoustical attributes of a loudspeaker with varying success. This paper shows how a model that incorporates ... En savoir plus

On the Numerical Modeling of Elastic Resonant Acoustic Scatterers

V. Romero-García[1], A. Krynkin[2], J.V. Sánchez-Pérez[1], S. Castiñeira-Ibáñez[3], and L.M. Garcia-Raffi[4]
[1]Centro de Tecnologías Físicas Acústica, Universidad Politécnica de Valencia, Valencia, Spain
[2]School of Computing, Science & Engineering, University of Salford, Salford, United Kingdom
[3]Depto. Física Aplicada, Universidad Politécnica de Valencia, Valencia, Spain
[4]Instituto Universitario de Matemática Pura y Aplicada, Universidad Politécnica de Valencia, Valencia, Spain

The elastic and geometrical properties of Low Density Polyethylene (LDPE) foam are used in this paper to improve the attenuation properties of periodic arrangements of acoustic scatterers known as Sonic Crystals (SCs). A specific recycled profile of LDPE foam is used as elastic-acoustic ... En savoir plus

Finite Element Modeling of Ultrasonic Transducers for Polymer Characterization

S. De Paolis[1], F. Lionetto[1], and A. Maffezzoli[1]

[1]Department of Innovation Engineering, University of Salento, Lecce, Italy

Finite element analysis has been used to model the ultrasonic wave propagation both in a custom made transducer and in the tested polymer sample. The model consists of acoustic (passive elements) and electroacoustic (active elements) transmission lines. The simulation of the acoustic ... En savoir plus

Analysis of the Acoustic Response of a Railroad Bridge

K. Koppenhoefer[1], S.Yushanov[1], and M.H. McKenna[2]

[1]AltaSim Technologies, LLC, Columbus, Ohio, USA
[2]U.S. Army Engineering Research and Development Center

Aging infrastructure requires frequent inspections to assess their structural integrity. However, the large amount of existing infrastructure, and the distance between these structures present significant challenges to inspectors. Acoustics-based technologies represent a simple, and ... En savoir plus

Modeling the response of photoacoustic gas sensors

S.L. Firebaugh[1], F. Roignant[2], and E.A. Terray[3]

[1]United States Naval Academy, Annapolis, Maryland, USA
[2]Polytechnique Nantes, Nantes, France
[3]Woods Hole Oceanographic Institution, Woods Hole, Massachusetts, USA

A fast, high-sensitivity detector is required for studies of environmentally relevant gases. Photoacoustic spectroscopy (PAS), an absorption spectroscopy technique in which absorption is detected as sound, is explored as a possible solution. A tuning-fork based PAS sensor is modeled ... En savoir plus

Computational Modeling of Wave Propagation in a Geophysical Domain

J. McKenna[1], M. McKenna[1], S. Yushanov[2], J. Crompton[2], and K. Koppenhoefer[2]
[1]U.S. Army Engineering Research and Development Center
[2]ACES of Columbus, LLC, Columbus, OH, USA

The propagation of shear (S) and compression (P) waves within the earth allows geologists to track seismic events and to identify subterranean structure. This work shows the strong effect of including the variation of wave speed through the top thirty meters of the earth. By including ... En savoir plus

PCCP Profiling and Tube Wave Analysis of WRE Signal

N. Chowdhury[1], Z. Liao[2], and L. Zhao[1]
[1]Department of Electrical & Computer Engineering, Ryerson University, Toronto, ON, Canada
[2]Department of Architectural Science, Ryerson University, Toronto, ON, Canada

Acoustic wave propagation due to the breakage or slippage of reinforced wire in water-filled prestressed concrete cylinder pipe (PCCP) attracts interest in non-destructive pipe testing. Current practice of acoustic emission (AE) detection and wire-break related events (WRE) recognition ... En savoir plus

Premier

391–400 of 492

Dernier