Articles techniques et présentations

Recherche rapide

Ressources

Livres Blancs

Voyez comment la modélisation et la simulation sont utilisées par les industries La modélisation et la simulation multiphysiques pilotent l'innovation dans tous les grands secteurs d'activité et dans le monde universitaire — comme en témoignent les nombreuses utilisations présentées dans des articles et des posters techniques présentés par des ingénieurs, chercheurs et scientifiques à la Conférence COMSOL chaque année. Inspirez-vous des récents proceedings réunis ci-dessous, ou, pour trouver les présentations les plus intéressantes dans votre domaine d'intérêt, utilisez la recherche rapide.

Consultez les proceedings de la Conference COMSOL 2024

Terme recherché:

Acoustics and Vibrations

Simplified Finite Element Simulation of a SAW Hydrogen Sensor using COMSOL Multiphysics

N. Krishnan[1], H. Nemade[1,2], and R. Paily[2]
[1]Centre for Nanotechnology, Indian Institute of Technology Guwahati, Assam, India
[2]Department of Electronics and Communication Engineering, Indian Institute of Technology, Assam, India

In this paper, we discuss a simplified finite element method simulation of surface acoustic wave (SAW) delay line hydrogen sensor using COMSOL Multiphysics. A delay line SAW sensor consists of a transmitting interdigital transducer (IDT) and a receiving IDT separated by a few ... En savoir plus

Study & Modeling of 'Acoustic Matching Layers' for Ultrasound Imaging Probes Through Pulse-Echo FEM Simulation

L. Spicci[1]
[1]Esaote SpA, Florence, Italy

Ultrasound Imaging probes are specific devices that require a very detailed design of acoustic impedance match for the stack of layers that form the probe head (1,3). These are typically made of silicone rubber, special epoxy resins, polyurethanes and, of course, piezoelectric ... En savoir plus

Optimization of Acoustic Silencer for the Screw Compressor System

M. Swamy[1], L. J. van Lier[1], J. Smeulers[1]
[1]TNO, Delft, The Netherlands

In one of the screw compressor system, designed silencer was not optimal. A great challenge was the large variation in operating conditions, especially the variation of the molecular weight of the gas. There was need to optimize the silencer. This paper describes the acoustic modelling ... En savoir plus

An Improved Loudspeaker Frequency Response by Using a Structure of Rigid Absorptive Panel in a Vented Cabinet

R. Balistreri[1]
[1]Community Light & Sound Inc., Chester, PA, USA

When placing a loudspeaker in a cabinet, standing waves inside the cabinet affect the frequency response with ripples. This peaks and dips due to pressure cancellation inside the cabinet have an effect on the diaphragm and generating sound out from the vents. If it was in a condition of ... En savoir plus

Characterization of the Process of Ultrasound Driven Dispersion of Nanoparticles in High Viscosity Liquids

P. Pasumarty[1], H. Choi[1]
[1]Clemson University, Clemson, SC, USA

Even though sonochemical reactors have been studied extensively for decades, there is limited data on their characterization when the volume of the sample is fixed. The Acoustics Module and COMSOL Multiphysics® software are used to resolve the pressure field. The validated numerical ... En savoir plus

Hydrophone Acoustic Receiver Modeling: Turbulent Flow Modeling and Acoustic Analysis

D. Groulx[1], A. Bharath[1], S. Campbell[1]
[1]Department of Mechanical Engineering, Dalhousie University, Halifax, NS, Canada

The field of underwater acoustics research is constantly growing with the ongoing improvement of acoustic measuring techniques. An acoustic hydrophone receiver is a passive listening device which is widely used in biological research and sonar technology. The hydrophone however suffers ... En savoir plus

Acoustical Analysis of a Home Recording Studio

K. Anderson[1], A. Smith[1], D. Forgette[1]
[1]Mechanical Engineering, California State Polytechnic University at Pomona, Nonlinear FEM/CFD Multiphysics Simulation Lab, Pomona, CA, USA

In this poster the acoustic analysis of a small home recording studio is presented.. Figure 1 illustrates the recording studio room which was simulated using the COMSOL Multiphysics® software with the Acoustics Module [1]. The propagation of sound is modeled as pressure waves in which ... En savoir plus

Acoustic-Structure Interaction Simulation of a Differential Phase Sensor

J. H. Lee[1]
[1]Department of Mechanical Engineering, American University of Sharjah, Sharjah, UAE

The idea of application as a hearing device based on a parasitoid fly, Ormia ochracea has been studied extensively recently. This paper addresses another possible application as an underwater directional sensor. In order to study the feasibility of the application, it is necessary to ... En savoir plus

Modal Analysis of Functionally-Graded Metal-Ceramic Composite Plates

E. Gutierrez-Miravete[1], W. L. Saunders II[2], K. Pendley[3]
[1]Rensselaer at Hartford, Hartford, CT, USA
[2]General Dynamics Electric Boat, Groton, CT, USA
[3]United Technologies - Pratt & Whitney, East Hartford, CT, USA

The determination of the modes of vibration of Functionally Graded-Metal-Ceramic Composite plates is important in practice in order to prevent undesired resonances in structural components. This paper describes the application of COMSOL Multiphysics® software for the determination of the ... En savoir plus

Acoustic and Flow Analysis to Reduce Boiler Hum

Th. B. J. Campmans[1],
[1]LBPSIGHT, Nieuwegein, The Netherlands

A installation caused severe hum, with 30 Hz as dominant frequency, causing serious annoyance. The acoustic study showed resonances around 30 Hz. Poor flow conditions existed at the inlet and outlet of the forced draft fan. Flow patterns were studied using CFD. Both the inlet and ... En savoir plus

Premier

411–420 of 507

Dernier