Ici vous trouverez les présentations issues des Conférences COMSOL à travers le monde. Réalisées par des utilisateurs de COMSOL Multiphysics, ces présentations explorent tous les domaines actuels d'innovation. Les applications couvrent pratiquement tous les secteurs industriels et impliquent des phénomènes électriques, mécaniques, fluidiques et chimiques. Utilisez la recherche rapide pour trouver les présentations les plus intéressantes dans votre domaine d'intérêt.

Consultez les proceedings de la Conference COMSOL 2020

Batteries, Fuel Cells, and Electrochemical Processesx

Na-MCl2 Cell Multiphysics Modeling: Status and Challenges

R. Christin [1][2], M. Cugnet [2], N. Zanon [3], G. Crugnola [4], P. Mailley [5],
[1] FIAMM, Aubergenville, France
[2] Laboratory for Electrochemical Storage (CEA), Le Bourget du Lac, France
[3] FIAMM R&D, Montecchio, Italy
[4] FIAMM R&D, Stabio, Switzerland
[5] Laboratory of Chemistry for Materials and Interfaces (CEA), Grenoble, France

Introduction: After more than 20 years of experience in EV applications, the sodium nickel chloride technology is fully mature for large scale energy storage. Early on, mathematical modeling of Na-MCl2 cell (M standing for Fe or Ni) has attracted attention to help identifying predominant ... En savoir plus

Electrochemical Li-Ion Battery Modelisation for Electric Vehicles

A. Falconi [1], D. Sicsic [2], R. Cornut [3], C. Lefrou [4]
[1] Renault s.a.s, CEA/DSM/IRAMIS/NIMBE/LICSEN, Université de Grenoble Alpes, Grenoble, France
[2] Renault s.a.s, Renault technocentre, Guyancourt, France
[3] CEA/DSM/IRAMIS/NIMBE/LICSEN, Gif Sur Yvette Cedex, France
[4] Université de Grenoble Alpes, LEPMI, CNRS, Grenoble, France

The future development of electric vehicles is now strictly linked with their batteries. In parallel of the actual research focused on the development of new materials and increase their performances in terms of energy, power, cost, durability and weight, it is necessary to develop ... En savoir plus

Design and Implementation of a Small UAV’s Pod Equipped with a Solid Oxide Fuel Cell

N. Briguglio [1], G. Giacoppo [1], O. Barbera [1], F. Cipiti [1], M. Ferraro [1], G. Brunaccini [1], L. Di Giovanni [1], N. Randazzo [1], E. Antonucci [1]
[1] CNR ITAE, Italy

Unmanned aerial vehicles (UAVs) have recently received great interest due to their great potential in both military and civil applications [1-4]. Testing and construction of UAVs is expensive and time consuming and a simulation approach can help to reduce cost for both design and tests. ... En savoir plus

Modeling Degradation in Lithium-Sulfur Batteries

R. Purkayastha [1], G. Minton [1], L. O'Neill [1], S. Walus [1], M. Wild [1], M. Marinescu [2], T. Zhang [2], G. Offer [2]
[1] Oxis Energy Ltd, Culham Science Centre, Abingdon, Oxfordshire, United Kingdom
[2] Mechanical Engineering Department, Imperial College, London, United Kingdom

Two Anode Surface processes are examined : Formation of Solid Electrolyte Interphase (SEI) and heating due to Shuttle Current. During charging, higher order sulfur species are reduced at the anode surface, while they are concurrently being oxidized at the cathode. This leads to the ... En savoir plus

Electrochemical Characterization of the Microband Graphite Electrodes

A. V. Volkov [1], A. N. Sekretaryova [2], I. V. Zozoulenko [1], A. P. F. Turner [2], M. Yu. Vagin [2], M. Eriksson [2]
[1] Laboratory of Organic Electronics, Department of Science and Technology, Linköping University, Norrköping, Sweden
[2] Department of Physics, Chemistry and Biology, Linköping University, Linköping, Sweden

The microband design of microelectrodes is a cost-effective and easily-fabricated compromise combining convergent mass transport, due to microscale width as a critical dimension, and high output currents due to the macroscopic length. Among the various techniques available for microband ... En savoir plus

Electrical and Thermal Modeling of a Molten Salt Electro-Refiner

A. Oury [1],
[1] SIMTEC, Grenoble, France

Numerical simulation can be advantageously employed to predict the main cell features (e.g., the reaction rate distribution on the electrodes, the cell voltage, or the electrolyte temperature) in order to optimize the design and operational conditions of the process. In this poster, we ... En savoir plus

Modeling Thermal Effects of Battery Cells Inside Electric Vehicle Battery Packs

M. R. Khan [1], S. K. Kær [1],
[1] Department of Energy Technology, Aalborg University, Aalborg, Denmark

The poster presents a methodology to account for thermal effects on battery cells to improve the typical thermal performances in a pack through heating calculations generally performed under the operating condition assumption. The aim is to analyze the issues based on battery thermo ... En savoir plus

Modeling an Ejector for Hydrogen Recirculation in a PEM Fuel Cell

X. Corbella [1], R. Torres [2], J. Grau [2], M. Allué [3],
[1] Escola Universitària d’Enginyeria Tècnica Industrial de Barcelona (Universitat Politècnica de Catalunya), Barcelona, Spain
[2] Fluid Mechanics Department (Escola Universitària d’Enginyeria Tècnica Industrial de Barcelona - Universitat Politècnica de Catalunya), Barcelona, Spain
[3] Institut de Robòtica I Informàtica Industrial (Consejo Superior de Investigaciones Científicas – Universitat Politècnica de Catalunya), Barcelona, Spain

PEM Fuel Cells’ durability and performance can be increased using an ejector based hydrogen recirculation system. In this work, a CFD model has been implemented to simulate the flow within an ejector used to recirculate hydrogen in PEM Fuel Cell systems. The model has been validated ... En savoir plus

Transient Model of a Fluorine Electrolysis Cell

J. Vukasin [1], I. Crassous [1], B. Morel [1], J. Sanchez-Marcano [2], P. Namy [3]
[1] HRP, AREVA NC, France
[2] Institut Européen des Membranes - CNRS, France
[3] Simtec, France

In the nuclear fuel cycle, fluorine is produced by the electrolysis of the molten salt KF-2HF. It is a complex process to study since hydrofluoric acid and fluorine are hazardous and highly corrosive. A 3D-model of a lab-scale fluorine electrolysis cell has been developed to increase ... En savoir plus

Copper Electroplating Parameters Optimization

L. M. A. Ferreira [1],
[1] CERN , Geneva, Switzerland

Aqueous based copper electroplating seems the most reliable, flexible, cost effective method to create a copper layer on stainless steel coupler devices; this however, doesn’t imply a straightforward application, as subcomponents geometry is complex and tolerances are tight. At CERN, two ... En savoir plus