Articles techniques et présentations

Recherche rapide

Ressources

Livres Blancs

Découvrez comment la simulation multiphysique contribue à faire progresser la recherche dans le monde entier grâce à des applications innovantes

La modélisation et la simulation multiphysiques stimulent l'innovation dans l'industrie et le monde universitaire, comme en témoignent les nombreuses applications présentées chaque année par des ingénieurs, des chercheurs et des scientifiques dans leurs articles techniques et posters lors des conférences COMSOL.

Inspirez-vous des travaux présentés lors des dernières conférences, rassemblés ci-dessous. Pour trouver une présentation en particulier ou affiner votre recherche par domaine d'application, année ou lieu de conférence, utilisez l'outil de recherche rapide.

Consultez les proceedings de la Conference COMSOL 2026

Terme recherché:

Computational Fluid Dynamics

Error Analysis in Estimating Temperature-Dependent Thermal Diffusivity and Kinetic Parameters using Heat Penetration Data

K.D. Dolan[1,2], A.R. Sommerlot[1], and D.K. Mishra[1]
[1]Department of Biosystems and Agricultural Engineering, Michigan State University, East Lansing, Michigan, USA
[2]Department of Food Science and Human Nutrition, Michigan State University, East Lansing, Michigan, USA

Growing consumer demand for nutraceuticals has stimulated interest by food companies to increase levels of these health-promoting compounds. Thermal processing of canned foods in a retort produces a unique problem: some of the nutraceuticals are highly sensitive to temperature, and ... En savoir plus

Model of a Filament Assisted CVD Reactor

J. Brcka[1]

[1]TEL US Holdings, Inc., Technology Development Center, Albany, New York, USA

In this presentation we are dealing with the computational fluid model of a Filament Assisted Chemical Vapor Deposition (FACVD) reactor. Proposed strategy in this study involved several steps: (a) development a computational model for FACVD process capable to describe and obtain with ... En savoir plus

Linear Convection and Conduction in Cylinders of Water Exposed to Periodic Thermal Stimuli

R.E. Tosh[1], and H.H. Chen-Mayer[1]
[1]National Institute of Standards and Technology, Gaithersburg, Maryland, USA

Primary reference standards for determining absorbed dose to water in radiotherapy beams used at cancer clinics and hospitals ultimately must make reference to the temperature change in water produced by ionizing radiation. The most direct experimental technique for this purpose is water ... En savoir plus

Coupled Heat and Mass Transfer Processes in Enclosed Environments

J.L.Wilson[1], and R. Dwivedi[1]

[1]New Mexico Institute of Mining and Technology, Socorro, New Mexico, USA

Geothermally driven natural convection in enclosures is a ubiquitous process occurring in many physical environments such as caves, mines, etc. We have numerically simulated laminar and turbulent natural convection in isolated air-filled cavities, buried in a more conductive rock mass. ... En savoir plus

Modeling Two-Phase Electrophoresis

W. Clark[1], and M. Lindblad[1]
[1]Chemical Engineering Department, Worcester Polytechnic Institute, Worcester, Massachusetts, USA

Two-phase electrophoresis is a separation method that combines aqueous two-phase partitioning with electrophoresis and has promise for large scale recovery of biological products. Aqueous two-phase systems formed by adding two polymers, like dextran and polyethylene glycol, to water ... En savoir plus

Newtonian and Non-Newtonian Blood Flow over a Backward-Facing Step: Steady-State Simulation

M.W. Siebert[1], and P.S. Fodor[1]
[1]Physics Department, Cleveland State University, Cleveland, Ohio, USA

In this work, the fluid flow over a 2D backward-facing step is analyzed in order to provide a case study for the use of different models for the blood dynamic viscosity in COMSOL Multiphysics. Three non-Newtonian models, as well as the Newtonian model are used to study the shear stresses ... En savoir plus

Reliability Evaluation for Static Chamber Method at Landfill Sites

H. Ishimori[1], K. Endo[1], and M. Yamada[1]
[1]National Institute for Environmental Studies, Tsukuba, Ibaraki, Japan

In this study, COMSOL Multiphysics was used for the reliability evaluation for static chamber method at landfill sites. Static chamber method, which measures landfill gas emission fluxes, is widely used at landfill sites for the monitoring of greenhouse gas emission such as methane and ... En savoir plus

Reynolds Number Dependent Porous Media Flow Using the Brinkman Equation

R. Rieck[1], A. Bénard[1], and C. Petty[1]
[1]Michigan State University, Michigan, USA

Porous media fluid dynamic modeling has been widely explored and utilized in many academic and industrial applications. Cross flow filtration being one attractive application, whereas the fluid and filtrate flow parallel the porous media, and thereby induce shearing stress along the ... En savoir plus

Premier

1081–1088 of 1091

Dernier