Articles techniques et présentations

Recherche rapide

Ressources

Livres Blancs

Voyez comment la modélisation et la simulation sont utilisées par les industries La modélisation et la simulation multiphysiques pilotent l'innovation dans tous les grands secteurs d'activité et dans le monde universitaire — comme en témoignent les nombreuses utilisations présentées dans des articles et des posters techniques présentés par des ingénieurs, chercheurs et scientifiques à la Conférence COMSOL chaque année. Inspirez-vous des récents proceedings réunis ci-dessous, ou, pour trouver les présentations les plus intéressantes dans votre domaine d'intérêt, utilisez la recherche rapide.

Consultez les proceedings de la Conference COMSOL 2024

Terme recherché:

Electromagnetic Heating

Electrical Simulation and Current Spreading Analysis in the GaN-based Light-Emitting Diode Devices

J. Chen
Mechanical Engineering
National Central University
Taiwan

Numerical simulations can well predict the electric current and temperature distribution in GaN-based LED chips. It can be used to improve the device design and optimization of the LED devices. Future work will include the optical modeling to analyze the optical properties of the LED ... En savoir plus

Optimization of Thermoelectric Energy Harvester using COMSOL Multiphysics

A. Takezawa, and M. Kitamura
Division of Mechanical System and Applied Mechanics
Faculty of Engineering
Hiroshima University
Japan

This paper discusses a geometrical optimization method for thermoelectric generators. Our method provides the optimized geometry in accord with various arbitrary conditions such as types of materials, volume of materials, temperatures of installation position, and shape of installation ... En savoir plus

Behavioural Change on EM Exposure and its Modelling

K. Singh, N. Kothari, and S. Choudhary
Electronics and Communication Engineering Department
Geetanjali Institute of Technical Studies
Dabok, Udaipur
Rajasthan, India

This paper presents the ill-effects of EM exposure through experiment, simulation and modelling using COMSOL Multiphysics. Biological Effects of microwave radiations on living creatures are studied supported with the practical results. En savoir plus

Simulations of Polymer Based Micro Heater Operated at Low Voltage

M. Gayake[1], D. Bodas[2], and S. A. Gangal[1]
[1]Department of Electronic science, University of Pune, India
[2]Centre for Nanobioscience, Agharkar Research Institute, India

This paper presents a design of polymer based micro heater operating in the temperature range of 200- 250°C which could be operated at low voltage (battery operated). The micro heater has been designed and simulated using COMSOL 4.1, FEM simulation tool. Simulation was performed for ... En savoir plus

On the Simulation of Electromagnetic Forming Process of a Tube using Multiphysics Software

S. Gawade[1], P. P. Date[2], and S. B. Sharma[1]
[1]Production Engineering. Dept. SGGS IE&T, Nanded, India
[2]Mechanical Engineering. Dept, IIT, Bombay, India

Electromagnetic forming (EMF) is a typical high speed forming process using the energy density of a pulsed magnetic field to form workpieces made of metals with high electrical conductivity like e.g. aluminium. This forming process can be very advantageous as compared to conventional ... En savoir plus

3-D Design, Electro-Thermal Simulation and Geometrical Optimization of Spiral Platinum Micro-Heaters for Low Power Gas Sensing Applications Using COMSOL 4.1

V. Bansal, D. Kumar, B. Prasad, and A. Gujjar
Electronic Science Department

In this paper a thermal electric finite element method (FEM) analysis was used to investigate the thermal properties of individual electrically driven platinum micro-heaters. The geometric optimization for the micro-heater was performed by simulating a wide range of possible geometries ... En savoir plus

Modeling of Limestone Calcination Using Joule Heating

R. Kancharla, and M. Ramakrishna
Padmasri Dr. B.V.Raju Institute of Technology
Narsapur
Medak Dist, AP, India

The limestone calcination reaction is endothermic and will proceed only if the partial pressure of CO2 in the gas above the solid surface is less than the decomposition pressure of the CaCO3. As the reaction is endothermic, the conventional process for calcination uses coal firing in ... En savoir plus

Coupling of Wired PCB With Microwave Radiation – 3D Simulation and Experimental Valuation

T. D. Bui[1], F. Bremerkamp[2], and M. Nowottnick[2]
[1]Department of Automobile Engineering, Thanh Do University, Ha Noi, Vietnam
[2]Institute of Electronic Appliances and Circuits, Department “Reliability and Safety of Electronic Systems”, University of Rostock, Rostock, Germany

Modern electronic assemblies and printed circuit boards (PCB) with their sensitive structures and elements have to be protected against environmental influences by conformal coating or casting compounds. In this case the main challenge is the simultaneous curing of the polymers and the ... En savoir plus

Heat Transfer in High-Voltage Surge Arresters

O. Fritz[1], M. Ljuslinder[2], and B. Doser[2]
[1]ABB Switzerland Ltd, Corporate Research, Baden-Dättwil, Switzerland
[2]ABB Switzerland Ltd, High Voltage Products, Wettingen, Switzerland

We present examples of the use of COMSOL Multiphysics for the solution of electrical conduction in varistors coupled to the solution of long-term heat-transport through conduction and convection. We fit measured power-loss and impedance data with analytic functions in order to simulate ... En savoir plus

Numerical Modeling of Cold Crucible Induction Melting

I. Quintana[1], Z. Azpilgain[1], D. Pardo[2], and I. Hurtado[1]
[1]Mechanical and Industrial Production Department, Faculty of Engineering, Mondragon Unibertsitatea, Loramendi 4, Mondragon 20500 Gipuzkoa, Spain
[2]Department of Applied Mathematics, Statistics, and Operational Research, University of the Basque Country (UPV/EHU), Leioa, Spain, and IKERBASQUE (Basque Foundation for Sciences), Bilbao, Spain

This paper describes a numerical solution method for the simulation of a cold crucible induction melting (CCIM) process involving the coupling of electromagnetic, temperature and turbulent velocity fields. During the CCIM process, the metal charge is contained on a water cooled ... En savoir plus

Premier

131–140 of 186

Dernier