Consultez les proceedings de la Conference COMSOL 2024
The wide bandgap semiconductor silicon carbide (SiC) has drawn increasing attention in recent years as a promising material for high-power, high-frequency, and high-temperature operating devices. These outstanding properties of SiC make it a good candidate to replace silicon in many ... En savoir plus
When polypropylene (PP) is produced it contains impurities in the form of dissolved gasses. These gasses can be removed by heating the material (in the form of pellets in a silo) and flushing with plenty of fresh air. However, one of the gasses is C9, which is flammable. We built a model ... En savoir plus
This study presents simulation findings from a 4-way link box assembly, aimed at understanding temperature-related challenges. The primary objective was to assess maximum temperatures within the assembly, focusing on the Complete Assembly, UET, Copper Busbar, and Wedge Link Busbar. ... En savoir plus
Optimization of the shape of material for improving the power output of thermomagnetic oscillator Shivam Shukla a and Deepak K a,* a Department of Metallurgical Engineering, Indian Institute of Technology (BHU), Varanasi – 221005 *Corresponding author : deepak.met@iitbhu.ac.in Abstract ... En savoir plus
Droplets and their interaction with solid substrates are ubiquitous in nature. Such interactions also have commercial significance, as they are observed in many important applications. Impingement dynamics of aqueous droplets with solid substrates are largely understood due to extensive ... En savoir plus
Introduction Over the last years, there has been an increasing interest in plastic recycling as an alternative to reduce fossil fuel dependency. In this light, chemical recycling has been presented as a promising strategy to maximise the recycling rate, although this technology presents ... En savoir plus
It is a fact that IEC 60287 standard introduces important errors in the computation of the armor losses of submarine three-core lead sheathed armored cables, since the twisting of phases and armor wires is not considered. This results in an overestimation of cable size, and hence its ... En savoir plus
We present the model of THz sensor based on thermoelectric Bi-Sb thin films. The model is based on an electromagnetic heating interface and combines radiofrequency and heat transfer modules. The studied frequency was 0.14 THz, irradiation power 30 mW. Films had a thickness of 150 nm and ... En savoir plus
Seawater can be converted into fresh water using solar energy. This is as an easy, suitable and green solution method to obtain heat for desalination. It is possible to concentrate the sunlight heat flux onto a small focal area by using a Fresnel lens. When the focal area is correctly ... En savoir plus
Offshore operations, using Robotically Operated Vehicles (ROVs) in areas with high ambient temperatures require ampacity limitations to be established. Specifically, the risk of overheating ROV umbilicals and tethers when running at high power, due to multiple layers on winch drums is a ... En savoir plus