- Bridging the Terahertz Gap
- Modeling the Lithium-Ion Battery
- Protection contre la Corrosion
- Modélisation des batteries
- Modélisation et Simulation dans le développement des piles à combustible
- Modélisation thermique des petits satellites
- Analyse électro-vibroacoustique d'un transducteur à armature équilibrée
Découvrez comment la simulation multiphysique contribue à faire progresser la recherche dans le monde entier grâce à des applications innovantes
La modélisation et la simulation multiphysiques stimulent l'innovation dans l'industrie et le monde universitaire, comme en témoignent les nombreuses applications présentées chaque année par des ingénieurs, des chercheurs et des scientifiques dans leurs articles techniques et posters lors des conférences COMSOL.
Inspirez-vous des travaux présentés lors des dernières conférences, rassemblés ci-dessous. Pour trouver une présentation en particulier ou affiner votre recherche par domaine d'application, année ou lieu de conférence, utilisez l'outil de recherche rapide.
Consultez les proceedings de la Conference COMSOL 2026
This paper presents the modeling and simulation of an asymmetric thermoelectric module. The thermoelectric module is characterized by a novel module design and a lager temperature range than conventional high-temperature modules. The materials are boron carbide and titanium diboride ... En savoir plus
In this work the innovative concept is the use of a Cu based metallic foam, characterized by open cell structure, as active element for heat exchangers. The metallic foam, produced by liquid infiltration method, was introduced inside a Cu tube, as base element for the exchanger. In the ... En savoir plus
Ferrofluids have been successfully used in the seals for rotary shafts, but few studies focus on the reciprocating motion seals. Since the completely different operational regimes, previous experiences on the rotary motions could not be directly applied on the cases for reciprocating ... En savoir plus
Designing and constructing a lab-on-a-chip device poses a variety of questions. Transport of all required substances, detection of the analyte and its deposition on a sensor have to be incorporated. Different strategies have been developed to achieve good coverages of the sensor, like ... En savoir plus
Fixed nitrogen is used in many forms ranging from nitric acid to hydrogen cyanide and is used as such for industrial applications. The reactions to produce these products are highly endothermic and favored by high-temperature processing. The most basic route of chemically fixing nitrogen ... En savoir plus
This work falls into the framework of an ESA experiment, which consists of observing the behavior of patterns and structures that can be formed after instability onset in a HFE7100 liquid layer, evaporating into a nitrogen gas flow. This study is performed by a three-dimensional ... En savoir plus
A solid oxide fuel cell (SOFC) is composed of four layers (anode, electrolyte compatibility layer and cathode) of different ceramic materials. The anode layer is produced by tape casting, the remaining layers are deposited by screen-printing. The layers are sintered together at high ... En savoir plus
An incremental wear model has been developed using COMSOL Multiphysics® with MATLAB® to predict the evolution of component geometry as a result of wear. Whilst Archard’s wear law is a well-known empirical model for the prediction of wear volume, the design engineer is interested in ... En savoir plus
