- Bridging the Terahertz Gap
- Modeling the Lithium-Ion Battery
- Protection contre la Corrosion
- Modélisation des batteries
- Modélisation et Simulation dans le développement des piles à combustible
- Modélisation thermique des petits satellites
- Analyse électro-vibroacoustique d'un transducteur à armature équilibrée
Consultez les proceedings de la Conference COMSOL 2024
Sleep apnea is a type of sleep disorder characterized by pauses in breathing or instances of shallow or infrequent breathing during sleep. There is a need to diagnose sleep apnea since it leads to fluctuations in the oxygen level that in turn affect the heart rate and blood pressure. In ... En savoir plus
Surface acoustic wave (SAW) devices are widely used for their sensing capabilities and gas sensing is only one of many uses. There is an ever increasing need to make them as effective as possible by adding nanomaterials to the device. In this study a two-port delay-line structure with ... En savoir plus
As the ultrasonic sensor industry evolves towards lower costs, miniaturization, higher integration, and superior performance, Microelectromechanical Systems (MEMS)-based ultrasonic transducers have emerged as a prominent trend. This article introduces a Piezoelectric Micromachined ... En savoir plus
Liquid Metal Fast Breeder Reactor (LMFBR) employs molten sodium as coolant due to its suitable neutronic and thermal properties. Measurement of coolant flow rate is a very important factor both from operational and safety aspects of a fast reactor. Good electrical conductivity of liquid ... En savoir plus
Accurate, real-time measurement of arterial oxygen partial pressure (PaO₂) is essential for managing respiratory diseases and critical care conditions. Traditional arterial blood sampling for PaO₂ is invasive, painful, and provides intermittent snapshots rather than continuous ... En savoir plus
Monitoring of indoor CO2 concentration is of particular interest to detect room occupancy in order to optimize power consumptions of building. One approach to monitor the indoor CO2 concentration is to use optical detection using specific absorption lines of CO2 molecules in the infrared ... En savoir plus
Studying teeth grinding behavior and other oral conditions requires the ability to accurately measure the pressure on the teeth. Placing a sensor in the mouth requires small size devices with powering and measurement techniques that do not hinder the normal life of the patient. To meet ... En savoir plus
Monitoring of indoor CO2 concentration is of particular interest to detect room occupancy in order to optimise power consumptions of building. One technological approach is to use optical detection using specific absorption lines of CO2 molecules in the infrared domain close to 4.2 &mu ... En savoir plus
We propose the study of an electronic sensor allowing the collection of sprays in free space. The detector consists of three elements: a photodiode situated in the center of the structure to which is applied a bias voltage, an aluminum ring which referenced to a voltage higher than that ... En savoir plus
Dr Vladislav Djakov is the co-founder of Microvisk Technologies Ltd and the inventor of its MEMS-based Technology. Born in Belgrade, Serbia he came to UK in 1995 to pursue M.Sc. in Artificial Intelligence followed by Ph.D. in Micro-robotics. With over 14 years of extensive ‘hands-on’ ... En savoir plus
