Articles techniques et présentations

This paper is a preliminary design study to develop a hybrid atmospheric icing sensor which have an adequate potential to detect an icing event, icing type and icing rate together with icing load. The physics to detect icing event and icing type have been numerically understood using ... En savoir plus

A high performance MEMS Pirani sensor (VAC_03) was designed and optimized based on analytics. Due to the fact that this MEMS Pirani sensor is a 3D-Object, the calculation of the thermal radiation by analytics is limited. As the radiation behavior in the system is, beside the solid ... En savoir plus

Pressure sensors operating at the temperature higher that 500 °C are absent in the world market. Our goal is to develop a pressure sensor that can operate at the high temperature up to 700 °C. Our sensor will be made up of a ceramic sensible element and a metallic case. The sensible ... En savoir plus

The world is getting digitalized, demands for new and emerging technologies have reached its peak, and customer demands have taken a U-turn. To cope with such unique requirements many systems and system devices are into the market and one of such enhancing technology is MEMS. MEMS are ... En savoir plus

A wireless passive pressure sensor and the measurement system were design and simulated using COMSOL 4.3. The sensor is based on MEMS capacitor attached to a planar inductor for wireless powering and readout. An external coil is used for the measuring system. The pressure to be measured ... En savoir plus

In semiconductor gas sensors, the base of the gas detection is the interaction of the gaseous species at the surface of the semiconducting sensitive material. Since the chemical reactions at the surface of the sensor material are functions of temperature. We simulate our µHeater design ... En savoir plus

The objective of this paper is to design and simulate Carbon Nano-Tube (CNT) based mass sensor that determines extremely low measures of molecules using COMSOL Multiphysics® software. The ultimate goal of this nanomechanical resonator sensor is that it allows detection at single ... En savoir plus

Lubricant oil is used to ensure proper functioning of industrial machinery such as turbines, gears, bearings and compressors. Oil analysis is used to detect and quantify the presence of wear metals and other contaminants in the lubricant of oil wetted systems, by sensing the change in ... En savoir plus

压电材料在受到机械应力时会产生电压，这种性质使压电材料在声波传感器领域具有广泛应用。湿度的测量和把控广泛地应用于粮食贮存、气象预报与加工以及国防建设等各个领域。当今社会对各种成本低、性能优异的湿度传感器的需求正在日益上升。石英晶体微天平（QCM）具有高灵敏度、无需物理接触、体积小、易于集成等特点，通过在石英晶体微天平表面覆盖一层能够响应水分子的材料，可以监测环境中的湿度。这种材料能够吸收和解吸水分，从而改变石英晶体的质量，进而影响其共振频率。通过检测这一频率的变化，我们可以准确获取周围的相对湿度。本研究利用有限元软件COMSOL的多物理场耦合功能 ... En savoir plus

Guided wave technology offers a promising approach for non-destructive testing (NDT), particularly in the detection of corrosion in critical structures such as pipelines. This study focuses on utilizing COMSOL Multiphysics to simulate guided wave propagation for optimizing corrosion ... En savoir plus