Articles techniques et présentations

Recherche rapide

Ressources

Livres Blancs

Voyez comment la modélisation et la simulation sont utilisées par les industries La modélisation et la simulation multiphysiques pilotent l'innovation dans tous les grands secteurs d'activité et dans le monde universitaire — comme en témoignent les nombreuses utilisations présentées dans des articles et des posters techniques présentés par des ingénieurs, chercheurs et scientifiques à la Conférence COMSOL chaque année. Inspirez-vous des récents proceedings réunis ci-dessous, ou, pour trouver les présentations les plus intéressantes dans votre domaine d'intérêt, utilisez la recherche rapide.

Consultez les proceedings de la Conference COMSOL 2024

Terme recherché:

Simulation of the Cooling and Phase Change of a Melt-Cast Explosive

W. Sanhye [1], C. Dubois [1], P. Pelletier [2], I. Laroche [2],
[1] Department of Chemical Engineering, École Polytechnique de Montréal, Montréal, QC, Canada
[2] General Dynamics Ordnance and Tactical Systems-Canada Inc., Repentigny, QC, Canada

Introduction Numerical modeling of melt-casting is becoming a popular tool for the energetic materials and explosives industry. Compared to traditional metal casting, the cooling cycle for explosive melts is significantly longer because of their high Prandtl numbers [1]. Improving the ... En savoir plus

Inclusive Routine of the Soil Surface Energy Balance in COMSOL Multiphysics®

M. Bortoloni[1], M. Bottarelli[2], Y. Su[3]
[1]Department of Engineering, University of Ferrara, Este, Italy
[2]Department of Architecture, University of Ferrara, Este, Italy
[3]Faculty of Engineering, University of Nottingham, Nottingham, UK

In ground-coupled heat pumps (GCHPs) the coupling between heat pumps and ground occurs by means of ground heat exchangers, that can be installed vertically inside boreholes (BHEs) or horizontally (HGHEs). In the horizontal installation, the heat exchangers are placed in shallow trenches ... En savoir plus

The 3D Mixed-Dimensional Quench Model of a High Aspect Ratio High Temperature Superconducting Coated Conductor Tape

W.K. Chan[1,2], J. Schwartz[2], P. Masson[3], and C. Luongo[4]
[1]FAMU-FSU College of Engineering, Tallahassee, FL, USA
[2]North Carolina State University, Raleigh, NC, USA
[3]Advanced Magnet Lab, Palm Bay, FL, USA
[4]ITER Organization/Magnet Division, Saint Paul-lez-Durance, France

A successful development of an effective quench detection and protection method for a high temperature superconducting (HTS) coil based on a HTS coated conductor tape lays on a thorough understanding of its slowly propagating, three-dimension (3D) quench behavior. Toward this goal, a 3D ... En savoir plus

Two-Dimensional Modelling of a Non-Isothermal PrOx Reactor with Water Cooling for Fuel Cell Applications

H. Beyer[1], B. Schönbrod[1], C. Siegel[1], M. Steffen[1], and A. Heinzel[1][2]
[1]Zentrum für BrennstoffzellenTechnik GmbH, Duisburg, Germany
[2]Institut für Energie und Umweltverfahrenstechnik, University of Duisburg-Essen, Duisburg, Germany

This work treats of a preferential oxidation reactor, which is simulated by a two-dimensional axial symmetric model. The reactor serves as purification of hydrocarbon reformat and converts the CO mole fraction from up to 1 % in the feed gas down to a few ppm at the outlet to deliver a ... En savoir plus

Intraplate Stress Analysis by COMSOL Multiphysics

G. Swetha, G. Pavankumar, and A. Manglik
National Geophysical Research Institute
Hyderabad
Andhra Pradesh, India

Mathematical modeling tools are extensively used in Geosciences to delineate the earth structure at various spatial scales as well as to simulate coupled earth processes involving multiphysics concepts. COMSOL, a Multiphysics finite element method based numerical modeling package, can be ... En savoir plus

Guided Wave in Engineering Structures Using Non-Contact Electromagnetic Acoustic Transducers: A Numerical Approach for the Technique Optimisation

S. Soua[1], A. Raude[1], and T-H. Gan[1]
[1]NDT Technology Group, TWI Ltd, Cambridge, United Kingdom

There are over 10 million kilometers of pipes and pipelines around the world that carry hazardous fluids and gases. Fluids include oil, oil products, chemicals such as solvents, caustics, acids, corrosives and combustibles often at high pressure and temperature. These pipes are ... En savoir plus

The Acoustoelastic Effect: EMAT Excitation and Reception of Lamb Waves in Pre-Stressed Metal Sheets

R.M.G. Ferrari[1]
[1]Danieli Automation S.p.A., Buttrio, UD, Italy

The acoustoelastic effect relates the change in the speed of an acoustic wave travelling in a solid, to the pre-stress of the propagation medium. In this work the possibility of assessing nondestructively the stress status in metal sheets, by using the acoustoelastic effect, is ... En savoir plus

Model Development and Implementation of a Membrane Shift Reactor

J. Völler[1], M. Follmann[1], C. Bayer[1], and T. Melin[1]

[1]AVT Chemical Process Engineering, RWTH Aachen University, Aachen, Germany

Low temperature fuel cells require hydrogen of high purity for electricity production to avoid catalyst poisoning. To purify hydrogenrich flue gases from hydrocarbon steam reforming membrane shift reactors with a metal membranes may be utilized. A model of a tubular membrane shift ... En savoir plus

Electrostatic Fluid Structure Interaction (EFSI) on the Huygens Experiment

R. Godard [1], J. de Boer[1], N. Ibrahim[2], and G. Molina-Cuberos[3]
[1]Royal Military College of Canada, Kingston, ON, Canada
[2]University of Toronto, Toronto, ON, Canada
[3]Campus Espinardo, Murcia, Spain

The Huygens Atmospheric Structure Instrument (HASI) was designed to characterize the physical properties of the lower atmosphere and surface of Titan, the planet-size moon of Saturn. The Relaxation Probe (RP) sensor on the Huygens probe, determined the electrical conductivity in the ... En savoir plus

Numerical Simulation of Evaporation Processes in Electron Beam Welding

E. Salomatova[1], D. Trushnikov[1], V. Belenkiy[1], V. Tsaplin[1]
[1]Perm National Research Polytechnic University, Perm, Russia

In this paper describes an original method for indirect measurement of the vapor pressure and temperature in the keyhole in electron beam welding. This method is based on the determination of the concentration of chemical elements in the vapor above the welding zone. Taking into account ... En savoir plus

Premier

1261–1270 of 1392

Dernier