Articles techniques et présentations

Recherche rapide

Ressources

Livres Blancs

Voyez comment la modélisation et la simulation sont utilisées par les industries La modélisation et la simulation multiphysiques pilotent l'innovation dans tous les grands secteurs d'activité et dans le monde universitaire — comme en témoignent les nombreuses utilisations présentées dans des articles et des posters techniques présentés par des ingénieurs, chercheurs et scientifiques à la Conférence COMSOL chaque année. Inspirez-vous des récents proceedings réunis ci-dessous, ou, pour trouver les présentations les plus intéressantes dans votre domaine d'intérêt, utilisez la recherche rapide.

Consultez les proceedings de la Conference COMSOL 2024

Toutes

Boston 2025

Terme recherché:

velocity field

Lithography-Patterning-Fidelity-Aware Electron-Optical System Design Optimization by Using COMSOL Multiphysics with MATLAB®

Sheng-Yung Chen [1], Kuen-Yu Tsai [1]
[1]Dept. of Electrical Engineering, National Taiwan University, Taipei, Taiwan

Electron-optical system (EOS) design for lithography provides the inherent advantage of higher resolution and maskless operation relative to optical technology. The use of multiple electron beams yields higher throughput, albeit with greater complexity in focusing, relative to the single ... En savoir plus

Studying Crosstalk Trends for Signal Integrity on Interconnects using Finite Element Modeling

J. Grover[1], Dr. A. Gupta[1]
[1]Birla Institute of Technology and Science, Pilani-Pilani Campus,Rajasthan ,India

In high-speed digital design, strong electromagnetic coupling exists between adjacent transmission lines. This manifests itself in the form of crosstalk voltage induced on either line. Crosstalk is modeled in terms of capacitance and inductance matrices which are extracted using COMSOL ... En savoir plus

Numerical Simulation of the Heat, Mass, and Momentum Transfer During the Microwave Drying of Osmodehydrated Porous Material

J. R. Arballo[1, 2], L. A. Campañone[1, 2], R. H. Mascheroni[1, 2]
[1]Universidad Nacional de La Plata (UNLP), La Plata, Buenos Aires, Argentina
[2]Centro de Investigación y Desarrollo en Criotecnología de Alimentos (CIDCA), La Plata, Buenos Aires, Argentina

Recent studies have been devoted to develop mathematical models to simulate the food processing using the porous media approach. The aim of this study is to simulate the microwave drying of osmodehydrated food by means of modeling the mass, energy and momentum transfer using the porous ... En savoir plus

FEM Simulation of Generation of Bulk Acoustic Waves and their Effects in SAW Devices

A.K. Namdeo[1], N. Ramakrishnan[2], and H.B. Nemade[1]
[1]Department of Electronics and Communication Engineering, Indian Institute of Technology Guwahati, Guwahati, India
[2]Centre for Nanotechnology, Indian Institute of Technology Guwahati, Guwahati, India

This paper presents finite element method (FEM) simulation study of the generation of bulk acoustic waves (BAWs) and their effect on the performance of surface acoustic wave (SAW) devices, using COMSOL Multiphysics. A SAW delay line structure using YZ-cut lithium niobate substrate is ... En savoir plus

Numerical Study of Droplet Formation inside a Microfluidic Flow-Focusing Device

Y. Li[1], M. Jain[1], K. Nandakumar[1]
[1]Cain Department of Chemical Engineering, Louisiana State University, Baton Rouge, LA, USA

The micro-nanometer sized droplets have tremendous applications in bio-diagnostics, polymerization processes etc. In this work, we numerically investigate the droplet formation process of silicone oil in aqueous solution in a MFF device. A conservative level-set method is adopted to ... En savoir plus

Investigation of Hydraulic Fracture Re-Orientation Effects in Tight Gas Reservoirs

B. Hagemann[1], J. Wegner[1], L. Ganzer[1]
[1]Clausthal University of Technology, Clausthal-Zellerfeld, Germany

In tight gas formations where the low matrix permeability prevents successful and economic production rates, hydraulic fracturing is required to produce a well at economic rates. As production from the well and its initial fracture declines, re-fracturing treatments are required to ... En savoir plus

Modelling of a 5 Cell Intermediate Temperature Polymer Electrolyte Fuel Cell (IT-PEFC) Stack: Analysis of Flow Configuration and Heat Transfer

A.S. Chandan[1], A. Mossadegh Pour[2], R. Steinberger-Wilckens[2]
[1]Centre for Hydrogen and Fuel Cell Research, University of Birmingham, Birmingham, United Kingdom
[2]University of Birmingham, Birmingham, United Kingdom

Polymer Electrolyte Fuel Cells (PEFCs) are a key technology in the advancement of society towards a low carbon future, in particular for use within the automotive sector. PEFCs are advantageous due to their low operating temperature (60-80 deg.C), quick start up times and responsiveness ... En savoir plus

Modeling of the Material/Electrolyte Interface and the Electrical Current Generated During the Pulse Electrochemical Machining of Grey Cast Iron

O. Weber[1], A. Rebschläger[1], P. Steuer[1], D. Bähre[2]
[1]Center for Mechatronics and Automatization, Saarbrücken, Germany
[2]Institute of Production Engineering, Saarland University, Saarbrücken, Germany

The Pulse Electrochemical Machining is especially suitable for the precise production of complex geometric contours with high precision and high surface quality demands in series manufacturing. During this process, the negative structure of an electrode is copied to the workpiece without ... En savoir plus

Sensitivity Optimization of Microfluidic Capacitance Sensors

S. Satti[1], M. Baghini[1]
[1]Indian Institute of Technology Bombay, Mumbai, Maharashtra, India

As a part of a lab-on-chip-device, more often it is required to measure dielectric constant of the fluid. For this purpose it is necessary to develop a sensor whose size is compatible with microfluidic channel. The work, presented in this paper, studies effect of the parameters ... En savoir plus

Streamer Propagation in a Point-to-Plane Geometry

M. Quast[1] and N.R. Lalic[1]
[1]Gunytronic GmbH, St Valentin, Germany

Corona discharge is used in several applications such as surface treatment of polymers, photocopying or dust removal in air conditioning. Streamer formation is undesirable for most of these applications. Therefore, several studies have been dedicated to investigate the formation and ... En savoir plus

Premier

1271–1280 of 1351

Dernier