Articles techniques et présentations

Recherche rapide

Ressources

Livres Blancs

Voyez comment la modélisation et la simulation sont utilisées par les industries La modélisation et la simulation multiphysiques pilotent l'innovation dans tous les grands secteurs d'activité et dans le monde universitaire — comme en témoignent les nombreuses utilisations présentées dans des articles et des posters techniques présentés par des ingénieurs, chercheurs et scientifiques à la Conférence COMSOL chaque année. Inspirez-vous des récents proceedings réunis ci-dessous, ou, pour trouver les présentations les plus intéressantes dans votre domaine d'intérêt, utilisez la recherche rapide.

Consultez les proceedings de la Conference COMSOL 2024

Terme recherché:

Laser Activated Gold Nanorods for the Photothermal Treatment of Cancer

F. Rossi[1], F. Ratto[1]
[1]CNR - Institute of Applied Physics "Nello Carrara", Sesto Fiorentino, Italy

Photothermal therapy through Gold Nanorods (GNRs) is a new approach for the minimally invasive treatment of cancerous tissue. In order to design the proper settings, it is important to study the thermal effect that are induced close to the nanoparticle (nanoscale model), in the close ... En savoir plus

Modeling of a Hybrid-Integrated Moving Magnet Drive for a Quasi-Static 2D-MEMS Vector Scanner

Klemens Birnbaum¹, Martin Blasl², Benjamin Mustin², Thilo Sandner²
¹Institute of Automation, Faculty of Electrical and Computer Engineering, TUD Dresden University of Technology, 01062 Dresden, Germany
²Fraunhofer Institute for Photonic Microsystems, Maria-Reiche-Str. 2, 01109 Dresden, Germany

Quasi-static 2D-MEMS vector scanners are micro-opto-electro-mechanical systems (MOEMS) made of monocrystalline silicon. The primary application for these controllable micromirrors is the high dynamic and precise deflection of laser beams, for example in light detection and ranging ... En savoir plus

Process simulation of Directed Energy Deposition process using COMSOL Multiphysics®

Vaibhav Nain¹
¹IREPA LASER

The process-induced deformation in the DED fabricated part is a critical issue to the scaling of the technology. Currently, an inefficient and expensive experiment trial-and-error approach is utilized to tackle this issue, however it is not feasible for large parts. Researchers have ... En savoir plus

Modeling VCSEL-to-SSMF Butt-Coupling for Enhanced Efficiency Using COMSOL Multiphysics®

M. Nasr Esfahani¹, J. Nanni¹, G. Tartarini¹
¹DEI “Guglielmo Marconi” University of Bologna Bologna, Italy

This study presents a numerical investigation of optical butt-coupling between Vertical-Cavity Surface-Emitting Lasers (VCSELs) operating at 850 nm and Standard Single-Mode Fiber (SSMF), a widely adopted configuration in cost-effective, high-speed optical interconnects, especially in ... En savoir plus

Optimization of Welding Parameters using 3D Heat and Fluid Flow Modeling of Keyhole Laser Welding

S. Gaied [1], M. Courtois [2], M. Carin [2], P. Le Masson [2]
[1] ArcelorMittal Global R&D, Montataire, France
[2] LUniv. Bretagne-Sud, Lorient, France

A Laser-welded blank (LWB) consists of steels of different thicknesses and/or grades welded together to produce a single blank prior to the forming process. LWB are mostly used in the automotive field where the high productivity of the laser welding process is an advantage. Numerical ... En savoir plus

Multiphysics Process Simulation of the Electromagnetic-Supported Laser Beam Welding

M. Bachmann, V. Avilov, A. Gumenyuk, and M. Rethmeier
BAM Federal Institute for Materials Research and Testing
Berlin, Germany

The article deals with the magnetically-supported high-power full-penetration laser beam welding of aluminum. A stationary simulation was conducted accounting for the effects of natural convection, Marangoni convection and solid-liquid phase transition as well as an electromagnetic ... En savoir plus

Laser-Ultrasonics Wave Generation and Propagation FE Model in Metallic Materials

A. Cavuto[1], G.M. Revel [1], M. Martarelli [2], F. Sopranzetti [2]
[1]Università Politecnica delle Marche, Ancona, Italy
[2]Università e-Campus, Novedrate (CO), Italy

A 2D axisymmetric model was considered in order to evaluate the propagation paths of the ultrasonic waves generated inside an aluminum plate sample due to a rapid thermal expansion produced by laser pulse. Laser Doppler Vibrometer is used to experimentally validate the numerical results ... En savoir plus

Formation Of Porosities During Spot Laser Welding : Case Of Tantalum Joining

C. Touvrey
CEA Valduc, France

During the welding of tantalum with a ND: YAG pulsed laser, a deep and narrow cavity, called the keyhole, is formed. At the end of the process, surface tension forces provoke the collapse of the keyhole. For important interface deformations, gas bubbles can be trapped into the melting ... En savoir plus

Simulation of Laser-Material Interactions for Dynamic Transmission Electron Microscopy Experiments

B.W. Reed[1], T.B. LaGrange[1], G.H. Campbell[1], and N.D. Browning[1,2]
[1]Lawrence Livermore National Laboratory, Livermore, CA, USA
[2]University of California Davis, Davis, CA, USA

The Dynamic Transmission Electron Microscope (DTEM) at Lawrence Livermore National Laboratory is a unique instrument able to capture images of fast-evolving microstructure with exposure times of only 15 ns. This is more than six orders of magnitude faster than conventional in situ ... En savoir plus

Simulation of Heating Sol-Gel Thin Film By Laser Pulse Train

J. Zhang[1], Y. Mizuyama[1], W. Xiong[2], Y. Zhou [2], and Y. Lu[2]
[1]Panasonic Boston Laboratory, Newton, MA, USA
[2]University of Nebraska, Lincoln, NE, USA

Simulation of laser pulse-train (25ns, 60 kHz and 3000 pulses) heating Sol-Gel thin film using COMSOL Multiphysics software is investigated. The results show two kinds of temperatures formed on film surface by laser pulse-train heating. One is a single pulse induced transient peak ... En savoir plus

Premier

111–120 of 532

Dernier