Articles techniques et présentations

Recherche rapide

Ressources

Livres Blancs

Voyez comment la modélisation et la simulation sont utilisées par les industries La modélisation et la simulation multiphysiques pilotent l'innovation dans tous les grands secteurs d'activité et dans le monde universitaire — comme en témoignent les nombreuses utilisations présentées dans des articles et des posters techniques présentés par des ingénieurs, chercheurs et scientifiques à la Conférence COMSOL chaque année. Inspirez-vous des récents proceedings réunis ci-dessous, ou, pour trouver les présentations les plus intéressantes dans votre domaine d'intérêt, utilisez la recherche rapide.

Consultez les proceedings de la Conference COMSOL 2024

Terme recherché:

FEM Simulation of Generation of Bulk Acoustic Waves and their Effects in SAW Devices

A.K. Namdeo[1], N. Ramakrishnan[2], and H.B. Nemade[1]
[1]Department of Electronics and Communication Engineering, Indian Institute of Technology Guwahati, Guwahati, India
[2]Centre for Nanotechnology, Indian Institute of Technology Guwahati, Guwahati, India

This paper presents finite element method (FEM) simulation study of the generation of bulk acoustic waves (BAWs) and their effect on the performance of surface acoustic wave (SAW) devices, using COMSOL Multiphysics. A SAW delay line structure using YZ-cut lithium niobate substrate is ... En savoir plus

On The Purification Of Waste Waters Using Multi-Bore Filters: Simulation Of A Long-Term Filtration Stage

I. Borsi
Dipartimento di Matematica U. Dini, Universita' di Firenze, Italy

We present the progress of the simulation activity we are carrying out within the PURIFAST LIFE+ project. We first present the model we formulated to describe the macroscopic effects of the filtration process taking place in a multi-bore filter, focusing on the fouling phenomenon. In ... En savoir plus

An Integrated Numerical-Experimental Approach for Heat Transfer Analysis of Industrial Furnaces

G. Petrone[1], A. Adorisio[2], S. Adorisio[2], M. Calderisi[3], A. Cecchi[3], M. Scionti[1], F. Turchi[3]
[1]BE CAE & Test, Catania, Italy
[2]Gadda Industrie, Ivrea, Italy
[3]Laboratori Archa, Pisa, Italy

This paper deals with an integrated numerical and experimental analysis work aiming at the investigation of the thermal distribution inside an industrial furnace built for metal materials treatments. The main goal of the research is to find the geometrical and/or functional parameters ... En savoir plus

Numerical Inversion of Surface Deformation at Long Valley Caldera (California) By Using 3D Mechanical Models

S. Pepe, P. Tizzani, and A. Manconi
IREA-CNR, Napoli, Italy

We use 3D numerical models to analyze the ground deformation observed at Long Valley Caldera (LVC) between 1992 and 2000 via space-based geodetic techniques. More specifically, we implement a complex model that includes the topography and the material heterogeneities information of LVC. ... En savoir plus

Heat Generation from Dielectric Loss, Internal Heat Generation and Vibration in COMSOL4.2 Multiphysics

T. R. Jeba, B. Vins, and V. Ramamoorthy
HCL Technologies

This paper presents a FEA approach to estimate temperature rise and thermal stress experienced in PZT/Solid structure due to internal heat generation and dynamic excitation. The power dissipative density consumed by structural damping of the mass structure, internal heat generation due ... En savoir plus

Piezoelectric Transducers and Ultrasound Imaging: Impact of Materials Properties and Multiphysics Aided Design

Marco Cati graduated cum laude and encomium citation in electronic engineering in 2001 from the University of Florence, where in 2005 he also received a Ph. D. degree in electronic engineering. In 2005 he joined the Research & Development Department of Esaote where he is currently in ... En savoir plus

Multiphysics Simulation of a Self-heating Paraffin Membrane Microactuator

P. Lazarou[1], C. Rotinat[1]
[1]CEA LIST/DIASI/LRI, Paris, France

A grand variety of microactuator technologies and demonstrators has been introduced during the last years. Of particular interest are the microactuators based on phase change materials and especially paraffin wax, which can volumetrically expand up to 15%, providing high force actuation. ... En savoir plus

Glass Plates Noise Transmission Suppression by Means of Distributed Piezoelectric Composite Actuators Shunted by an Active Circuit

K. Novakova[1][2], P. Mokry[2]
[1]Research Centre for Special Optics and Optoelectronic Systems (TOPTEC), Institute of Plasma Physics, Academy of Sciences of the Czech Republic, Turnov, Czech Republic
[2]Institute of Mechatronics and Computer Engineering, Technical University of Liberec, Liberec, Czech Republic

Glass windows represent a virtual sound source for buildings interior. It is very easy to make them vibrate by action of incident acoustic pressure wave. Therefore, non-negligible part of the wave is transmitted through the window. We propose and simulate a method based on the change of ... En savoir plus

Optimization of Bending-Type Ultrasonic Transducers with Rotational Symmetry Using COMSOL Multiphysics^®

M. Jungwirth[1] and M. Rabl[1]

[1]Wels School of Engineering, Upper Austria University of Applied Sciences, Wels, Austria

Ultrasonic sensors are commonly used for a wide variety of non-contact presence, proximity or distance measuring applications in industry, especially the automotive branch. This paper shows how the radiation properties of bending-type ultrasonic transducers with rotational symmetry ... En savoir plus

Improving Fuel Usage in Microchannel Based Fuel Cells

P. Fodor, and J. D'Alessandro
Dept. of Physics
Cleveland State University
Cleveland, OH

In this work a miniaturized fuel cell design based on microchannels, into which the liquid fuel and oxidizer streams are fed through T shaped connectors, is optimized for improved fuel usage. This particular design exploits the laminar nature of the fluid flow at small Reynolds numbers ... En savoir plus

Premier

1311–1320 of 1392

Dernier