Articles techniques et présentations

Recherche rapide

Ressources

Livres Blancs

Voyez comment la modélisation et la simulation sont utilisées par les industries La modélisation et la simulation multiphysiques pilotent l'innovation dans tous les grands secteurs d'activité et dans le monde universitaire — comme en témoignent les nombreuses utilisations présentées dans des articles et des posters techniques présentés par des ingénieurs, chercheurs et scientifiques à la Conférence COMSOL chaque année. Inspirez-vous des récents proceedings réunis ci-dessous, ou, pour trouver les présentations les plus intéressantes dans votre domaine d'intérêt, utilisez la recherche rapide.

Consultez les proceedings de la Conference COMSOL 2024

Toutes

Boston 2025

Terme recherché:

velocity field

Combined Analytical and Numerical Modeling of a Resonant MEMS Sensor for Viscosity and Mass Density Measurements

S. Cerimovic[1], R. Beigelbeck[2], H. Antlinger[3], J. Schalko[2], B. Jakoby[3], and F. Keplinger[1]
[1]Institute of Sensor and Actuator Systems, Vienna University of Technology, Vienna, Austria
[2]Institute for Integrated Sensor Systems, Austrian Academy of Sciences, Wiener Neustadt, Austria
[3]Institute for Microelectronics and Microsensors, Johannes Kepler University Linz, Linz, Austria

A resonant MEMS sensor for viscosity and mass density measurements of liquids was modeled. The device is based on Lorentz-force excitation and features an integrated piezoresistive readout. The core sensing element is a rectangular vibrating plate suspended by four beam springs. The ... En savoir plus

Current Distribution on PEM Fuel Cells with Different Flow Channel Patterns

A. Paulino[1], E. Cunha[1], E. Robalinho[2], R. Passos[3], E. Santiago[1]
[1]Instituto de Pesquisas Energéticas e Nucleares, São Paulo, SP, Brazil
[2]Universidade Nove de Julho, São Paulo, SP, Brazil
[3]Universidade Federal do Amazonas, Manaus, AM, Brazil

In this paper, PEM fuel cells with serpentine and interdigitated flow channel patterns were studied. The main objective was to analyze the influence of the flow channel design in the current distribution over the cell. A 3D isothermal model comprising the entire 5 cm² cell was developed ... En savoir plus

Modeling of Liquid Water Distribution at Cathode Gas Flow Channels in Proton Exchange Membrane Fuel Cell – PEMFC

S. Skoda[1], E. Robalinho[2], A. Paulino[1], E.F. Cunha[1], M. Linardi[1]
[1]Instituto de Pesquisas Energéticas e Nucleares, São Paulo, Brazil
[2]Universidade Nove de Julho, São Paulo, Brazil

The objective of this study is to determine the locations where liquid water accumulates at cathode gas flow channels, and the corresponding operating conditions. In such way it is possible to mitigate slug flow, responsible for channel blockage and hindering the diffusion of reactants ... En savoir plus

Numerical Analysis of the Effect of the Electrode Distance During the Determination of the Flammability Limits of Gases

F. Ferrero, M. Beckmann-Kluge, and V. Schröder
BAM Federal Institute for Materials Research and Testing
Berlin, Germany

Simulations with COMSOL Multiphysics were performed, in order to analyze the gas flow patterns during the induced ignition of gases. Simplified calculations were performed. The ignition spark was assumed to have a temperature of 2000 K and a laminar flow was selected. 2D calculations ... En savoir plus

Optimal Design of Slit Resonators for Acoustic Normal Mode Control in Rectangular Rooms

S. Floody[1], R. Venegas[2], and F. Leighton[3]
[1]Universidad de Chile, Facultad de Artes, Departamento de Música y Sonología, Licenciatura en Sonido, Santiago, Chile
[2]University of Salford, Acoustics Research Centre, Salford, UK
[3]Universidad Tecnológica de Chile Inacap, Sede Pérez Rosales, Santiago, Chile

The present article presents a method to redistribute the acoustic modes of a rectangular enclosure in the low frequency range using slit resonators. The objective of the present work is to compare different strategies of optimal design in order to determine the dimensions of the ... En savoir plus

Pulsed Eddy Current Probe Development to Detect Inner Layer Cracks Near Ferrous Fasteners Using COMSOL Modeling Software

V. Babbar[1], P. Whalen[1], T. Krause[1]
[1]Department of Physics, Royal Military College of Canada, Kingston, ON, Canada

Surface breaking cracks in conductive structures can be detected by conventional eddy current techniques. However, it is very difficult to detect inner layer defects in multilayered conductive structures either by conventional eddy current or ultrasonic methods. The transient/pulsed eddy ... En savoir plus

Ultrasound Piezo-Disk Transducer Model For Material Parameter Optimization

L. Spicci, and M. Cati
Esaote SpA, Florence, Italy

The technology involved in high performance ultrasound imaging probes needs a reliable model to help in new projects development and performance simulations. To achieve a useful model, it is necessary to use correct values for all material parameters involved in the electro-acoustical ... En savoir plus

Design and Optimization of a High Performance Ultrasound Imaging Probe Through FEM and KLM Model

L. Spicci, and M. Cati
Esaote SpA
Florence, Italy

The present paper describes the development of a full FEM model for linear array high performance 5MHz ultrasound imaging transducer. As a preliminary design, a mono dimensional electro-acoustical KLM model was realized, then the complete FEM was developed and optimized. The optimized ... En savoir plus

Property and Performance Prediction of Meta Composites for Novel Applications

C. Thiagarajan[1]
[1]ATOA Scientific Technologies Private Limited, Whitefield, Bangalore 560066, India.

Metacomposites are new class of materials with unusual properties that can be engineered using existing materials with usual properties. The unusual properties of metacomposites are derived from the structure, analogues to atomic arrangement in crystal lattice. These material exhibits ... En savoir plus

EM Simulation of a Low-Pass Filter Based on a Microstrip Defected Ground Structure

J.E. Rayas-Sánchez[1], J. Aguilar-Torrentera[1], Z. Brito-Brito[1], J.C. Cervantes-González[2], C.A. López[2]
[1]Universidad Jesuita de Guadalajara, Tlaquepaque, Jalisco, Mexico
[2]Intel Guadalajara Design Center, Tlaquepaque, Jalisco, Mexico

We perform EM simulations of a low-pass microstrip filter consisting of a cross-junction open stub and two unit sections implemented as defected ground structures (DGS). The defect introduced by unit sections corresponds to an etched lattice on the copper backside ground plane. The ... En savoir plus

Premier

1321–1330 of 1351

Dernier