Articles techniques et présentations

The micro-nanometer sized droplets have tremendous applications in bio-diagnostics, polymerization processes etc. In this work, we numerically investigate the droplet formation process of silicone oil in aqueous solution in a MFF device. A conservative level-set method is adopted to ... En savoir plus

The most common way to exchange heat with the bedrock in Ground Source Heat Pump (GSHP) applications is circulating a fluid through a U-formed closed loop in vertical boreholes drilled several tenths of meters into the ground. This study presents and compares the results of eight cross ... En savoir plus

Sulfur, which is incorporated in the biomass structure, is released into the product gas during gasification as hydrogen sulfide. Hydrogen sulfide is known to deactivate nickel based steam reforming catalysts by chemisorption on the metal surface during steam reforming process. ... En savoir plus

In the conference we bring together a community that is scientifically diverse in an event about the use of COMSOL Multiphysics. Oral and poster presentations highlight achievements in multiphysics modeling and simulations using COMSOL. En savoir plus

A 2D isothermal axisymmetric model of an anode-supported Solid Oxide Fuel Cell (SOFC) has been developed. Also a parametric analysis to find the effect of important parameters on the cell performance has been done. This simulation has been carried out at 1 atm and 1073 K. The PEN ... En savoir plus

The structural design of temporary storage facilities for radioactive waste generally requires the fulfillment of highly severe performance criteria if compared to conventional buildings. This work focuses on the study of the behavior of a steel door subject to the impact of extreme wind ... En savoir plus

Pulse-echo FEM simulation is seldom found in literature for ultrasound imaging array probes, since the complete modeling of such device is extremely complicated. Nevertheless, the 2D FEM described in the present work was successful, thanks to the following design procedure (see figure): ... En savoir plus

Petroleum reservoir simulation is a process of modeling the complex physical phenomena inside a reservoir. This study presents an application of an analytical based numerical scheme so called the Boundary Element Method (DRBEM). It is proven to be able to provide a computationally ... En savoir plus

The research documented herein was funded by a research contract between the Research Reactors Division (RRD) of Oak Ridge National Laboratory (ORNL) and the University of Tennessee, Knoxville (UTK) Mechanical, Aerospace and Biomedical Engineering Department (MABE). The research was ... En savoir plus

The consequences of hip fracture and femoral fracture are widely known. The mechanical strength of the femur varies in every person, but it is possible to predict the mechanical resistance with parameters like density, dimensions and mineral content. This paper uses different models and ... En savoir plus