- Bridging the Terahertz Gap
- Modeling the Lithium-Ion Battery
- Protection contre la Corrosion
- Modélisation des batteries
- Modélisation et Simulation dans le développement des piles à combustible
- Modélisation thermique des petits satellites
- Analyse électro-vibroacoustique d'un transducteur à armature équilibrée
Consultez les proceedings de la Conference COMSOL 2024
This study presents a model for simulating a subsurface pumped-hydro energy storage (battery) system. The model captures the coupling between fluid flow in an oil and gas type wellbore connected to a large hydraulic fracture embedded in a low-permeability reservoir. By integrating ... En savoir plus
Pore-scale modeling of multiphase flow through porous media is addressed most frequently to improve our understanding of flow and transport phenomena in such settings. It can be used to obtain macro-scale constitutive equations, to assign multiphase flow properties in large scale models, ... En savoir plus
Sustainable wastewater management has stimulated the exploration of innovative technologies, such as electrochemical nutrient recovery, which promises efficient recovery and reuse of vital nutrients, reducing environmental impacts and resource wastage. This study presents the modeling of ... En savoir plus
Experts in the industry are seeing glass substrates as a promising alternative material for interposers, particularly for heterogeneous packaging such as 2.5D or 3D packages [1]. Recently, Intel revealed that they have developed one of the industry's first substrates specifically ... En savoir plus
Conclusions about the influence of paper insulation on the electrical discharge initiation in mineral oil may be drawn on the basis of experimental studies. However, in some cases, these conclusions may be supported by electrical field analysis. Determination of maximum values of ... En savoir plus
Simulation of arc-wire additive manufacturing is under development in many academic and industrial sectors and at different scales. The study at the melt pool scale is often interesting to study deposition shapes and defects but not very relevant to calculate the stresses and strains at ... En savoir plus
A fully-parameterized 3D model of thermoelectric generator (TEG)-based energy harvesters is built. With the use of a coupled CFD and heat transfer FEM simulation, the temperature field within the complete system (heat source, TEG, cooler, ambient air) is computed. Especially the ... En savoir plus
A novel type of tunable surface acoustic waves (SAW) filter based on 1D phononic crystal controlled by electric is field proposed. The tunability of proposed filter varied over a wide range: 1-20%. Basic idea is electrical controlled induced periodical domains in ferroelectric film based ... En savoir plus
Lorentz Force Velocimetry (LFV) is a non-contact measurement technique used to determine flow rates in electrically conducting fluids by exposing the flow to an external magnetic field and measuring the Lorentz force acting on the magnet system. Typically, for LFV applications real and ... En savoir plus
This paper deals with the simulation study using COMSOL on the deformation of drop-within-drop system in a high intensity oscillating electric field. It consists of a composite drop suspended in a continuous phase. This composite drop has a smaller inner drop suspended within the larger ... En savoir plus