Articles techniques et présentations

Recherche rapide

Ressources

Livres Blancs

Ici vous trouverez les présentations issues des Conférences COMSOL à travers le monde. Réalisées par des utilisateurs de COMSOL Multiphysics, ces présentations explorent tous les domaines actuels d'innovation. Les applications couvrent pratiquement tous les secteurs industriels et impliquent des phénomènes électriques, mécaniques, fluidiques et chimiques. Utilisez la recherche rapide pour trouver les présentations les plus intéressantes dans votre domaine d'intérêt.

Consultez les proceedings de la Conference COMSOL 2024

Terme recherché:

Detector and Calibration-source Models for the SAFARI Detector Test Facility

M. Audley[1], G. de Lange[1], C. Bracken[2]
[1]SRON Netherlands Institute for Space Research, Groningen, The Netherlands
[2]National University of Ireland, Maynooth, Ireland

SAFARI is a far-infrared imaging spectrometer for the Japanese satellite observatory SPICA. SAFARI covers the wavelength range 34—210 μm (1.4—8.8 THz) using Transition-Edge-Sensor (TES) bolometers. We have built a test facility to qualify and characterize the SAFARI focal plane units ... En savoir plus

Sub-Millimetric Vacuum Electron Gun Design and Characterization

A. Leggieri[1], G. Ulisse[1], F. Di Paolo[1], F. Di Paolo[1], A. Di Carlo[1]
[1]University of Rome "Tor Vergata" - Department of Electronic Engineering, Rome, Italy

This paper presents the design of an electron gun that could be employed for vacuum tubes operating in the THz range. In this context, vacuum tubes one of the main difficulties in the realization of THz vacuum tube is the design and the realization of the electron gun. Since the ... En savoir plus

A Model of Noninvasive Radiofrequency Tissue Heating

L. Rems[1], D. Miklavcic[1]
[1]University of Ljubljana, Faculty of Electrical Engineering, Ljubljana, Slovenia

Noninvasive radiofrequency (RF) tissue heating is frequently used for skin tightening and facial wrinkle reduction as alternative to invasive surgical procedures. However, to ensure a safe and efficient therapy, the temperature of the skin and the subcutaneous tissue must be controlled ... En savoir plus

Development and Optimization of a Microfluidic Device for Magnetic Field Induced Cell Separation

L. Helmich[1], A. Hütten[1]
[1]Bielefeld University, Bielefeld, Germany

Besides conventional laboratory analysis methods, so called micro-total-analysis devices (µTAS) have gained great interest during the last decades. In this work we demonstrate a mechanism for the separation and selection of medical samples that can be applied within these µTAS devices. ... En savoir plus

Anisotropic Heat Transfer in Orthocyclically Wound Coils

T.L. van Vuure[1]
[1]Tecnotion B.V., Almelo, The Netherlands

Tecnotion produces linear motors for the high tech automation and semiconductor markets. Orthocyclically wound coils give the best performance because the largest number of windings can be packed into a given volume, as opposed to "wild winding", where the windings fall where they may. ... En savoir plus

Using the Electrical Field Analysis for Assessment of the Influence of Paper Insulation on Discharge Initiation in Oil

P. Rozga[1], D. Hantsz[1]
[1]Technical University of Lodz, Lodz, Poland

Conclusions about the influence of paper insulation on the electrical discharge initiation in mineral oil may be drawn on the basis of experimental studies. However, in some cases, these conclusions may be supported by electrical field analysis. Determination of maximum values of ... En savoir plus

Characterization of a 3D Photonic Crystal Structure Using Port and S-Parameter Analysis

M. Dong[1], M. Tomes[1], M. Eichenfield[2], M. Jarrahi[1], T. Carmon[1]
[1]University of Michigan, Ann Arbor, MI, USA
[2]Sandia National Laboratories, Albuquerque, NM, USA

We present a 3D port sweep method in a lossy silicon photonic crystal resonator to demonstrate the capabilities of COMSOL Multiphysics® for frequency domain analysis with input and output ports. This method benefits from the advantages of the S-parameter analysis to characterize the ... En savoir plus

Modeling and Simulation of High Permittivity Core-Shell Ferroelectric Polymers for Energy Storage Solutions

N. Badi[1], R. Mekala[1]
[1]University of Houston, Houston, TX, USA

The dielectric properties of ferroelectric PVDF polymer embedded core-shell (Al-Al2o3) nanoparticle is simulated using COMSOL Multiphysics® software. Significant increase in electrical permittivity of the composite at percolation threshold (K = 2800) is achieved when compared to ... En savoir plus

Modeling and Design of Material Inkjet Printer Ultraviolet LED Curing Cartridges Using COMSOL Multiphysics® for Printed Electronics Applications

M. Guvench[1], R. Wiswell[1]
[1]University of Southern Maine, Gorham, ME, USA

COMSOL Multiphysics® coupled with Solidworks® is employed to design, simulate and fabricate cartridges for a materials printer to accomplish in-situ curing of UV curable ink patterns as they are printed on flexible media for printed electronic circuit manufacturing. The cartridges ... En savoir plus

The Swelling Responsiveness of pH-Sensitive Hydrogels in 3D Arbitrary Shaped Geometry

K. J. Suthar[1], D. C. Mancini[2], M. K. Ghantasala[3]
[1]Advanced Photon Source, Argonne National Laboratory, Argonne, IL, USA
[2]Physical Sciences and Engineering, Argonne National Laboratory, Argonne, IL, USA
[3]Department of Mechanical Engineering, Western Michigan University, Kalamazoo, MI, USA

The pH-sensitive hydrogels are responsive to the pH of surrounding solution, which often resemble to biomaterials. Recently, pH-sensitive hydrogels are widely used in various devices as sensing media. We present the simulation of swelling characteristic of 3D-arbitarary-geometry, pH ... En savoir plus

Premier

1411–1420 of 1680

Dernier