- Bridging the Terahertz Gap
- Modeling the Lithium-Ion Battery
- Protection contre la Corrosion
- Modélisation des batteries
- Modélisation et Simulation dans le développement des piles à combustible
- Modélisation thermique des petits satellites
- Analyse électro-vibroacoustique d'un transducteur à armature équilibrée
Consultez les proceedings de la Conference COMSOL 2024
In this work the coupled electrochemical-thermal model for a lithium-ion battery (LIB) based on porous electrode theory has been extended with contributions coming from exothermic side reactions based on an Arrhenius law to model abuse mechanisms, which could lead to a thermal runaway. ... En savoir plus
The earlier work in our group has established that natural convection plays a dominant role in SLRFB. We used it to run a battery in which interestingly, the contents are agitated for brief spells when no current flows through it. The present work focuses on electrode configurations ... En savoir plus
Lithium-ion batteries are most preferable energy storage devices for its higher energy density, flexible form factor and lightweight design than comparable battery technologies. The present simulation work is focused on incorporating contact thermal resistance within a two-dimensional ... En savoir plus
为提高锂离子电池的能量密度,人们做出了许多努力,其中设计厚电极是一种很有前途的方法。传统上,在构建厚电极时会考虑动力学效应,例如降低迂回度以促进离子传输。这项工作创新性地研究了动力学和热力学对电极过程的耦合效应,并通过可视化电极过程对两者进行了竞争分析。结果表明,倾斜的平衡电位曲线有利于电极的均匀利用,但严重的动力学约束会使热力学调节失效。因此,改变电极的热力学特性以加强调节效果是一种很有前途的方法,而动力学约束则是限制电池容量释放的内在因素。深入的分析表明,确保离子和电子的混合控制可以显著缓解动力学反应的异质性。作为概念验证,我们构建了具有垂直通道的厚电极 ... En savoir plus
基于电化学-热耦合模型,模拟了常温条件下 LiFePO4 /Graphite 锂离子电池的放电过程,并对电池内部正负电极各个位置的电化学反应速度演化规律进行了模拟计算研究。结果表明:放电过程中电极各处的反应速率不同,且是动态变化的。 Electrochemical Thermal Model Based Research for Electrochemical Performance of Lithium Ion Batteries Jia Ming, Tang Yiwei, Cheng Yun, Du Shuanglong, Li Jie (School of ... En savoir plus
This paper is about the influence of the diffusion coefficient when simulating mixed electrode materials. The results show that when simulating dynamic behavior of a lithium ion battery cell with mixed electrode material the diffusion coefficients is very important. En savoir plus
There is great interest in developing all-solid-state lithium-ion batteries. They are ideal micro-power sources for many applications in portable electronic devices, electric vehicles and biomedical engineering. The batteries are possessed of high energy and power densities, good ... En savoir plus
Rechargeable batteries solve electrification and communication problems. As examples, hybrid battery-diesel generator power supplies efficiently power cell towers in remote locations, detached from the power grid. Large battery banks are used to load level user power requirements, ... En savoir plus
In last few decades, growing popularity of Electrical Vehicles (EVs) and Hybrid Electrical Vehicles (HEVs) associated with environmental concerns over oil-based transportation infrastructure, has attracted many research attentions over rechargeable Lithium-ion batteries (LIBs)1. Their ... En savoir plus
Harvesting of renewable energy requires efficient energy storage systems. Rechargeable flow batteries offer certain advantages over other energy storage techniques in use, such as the lifting of water, compression of air, flywheel, etc. In a flow battery, electrolyte flowing through ... En savoir plus
