Articles techniques et présentations

The purpose of this work is to investigate the triggering behaviour of safety fuses for mobile on board supply systems. The influence of different materials and shapes of the fuses on the triggering behaviour are analyzed. Furthermore, the simulation results obtained by the use of COMSOL ... En savoir plus

The efficiency of bioreactor lanfills depends on a homogeneous distribution of leachate in the waste body. Therefore, optimisation of leachate injection systems is a challenging issue for operators. Most studies have shown that surface Electrical Resistivity Tomography (ERT) can be a ... En savoir plus

For PE insulated cables both the temperature difference ?T and the electric field coefficient ? have a significant influence on the electric field distribution because PE has a nonlinear electric conductivity which is approximately a function of the temperature and the electric field ... En savoir plus

A compression driver is a certain type of electrodynamic loudspeaker which has a phase plug with slits in front of the diaphragm. The slits are narrow enough that the so-called viscothermal effects are of significant importance. In this paper a 2D axisymmetric finite element model of a ... En savoir plus

This elaboration presents a pre-study on automatic rotor construction for the flywheel energy storage system dedicated to operate in the levitation mode. The optimization profile model is used as a basic profile source. The 3D flywheel shape is generated on the base of obtained ... En savoir plus

State of the art proximity sensors are most often based on optical or tactile methods. Although these sensor systems are widely used (e.g. clamping protection) the reveal several drawbacks. Most optical sensors need a line of side whereas tactile sensors cannot be used to determine a ... En savoir plus

There is a considerable world-wide interest among lightning protection engineers and designers on the improvement of the standard procedures to assess the location of the most vulnerable places on complex structures to be struck by lightning flashes. This paper presents the ... En savoir plus

Glow corona discharges are generated from tall objects during thunderstorms previous to a lightning strike. These discharges generate space charge which can hinder the development of subsequent discharges. In order to quantify the shielding effect of positive glow corona, a transient, ... En savoir plus

Since October 2009 the laboratory of ATE has carried out collaborative research with the WTD 71 that aims for prediction, reduction and optimization of so-called underwater electric potential (UEP) signatures. COMSOL is used to simulate potential distributions in the context of impressed ... En savoir plus

Even though the researches in synchronous machines are advanced, the practical design still is a problem because of the complex interaction between several design parameters. The project “EaSync” at the Ostfalia University focuses on the bundling of machine models using COMSOL ... En savoir plus