- Bridging the Terahertz Gap
- Modeling the Lithium-Ion Battery
- Protection contre la Corrosion
- Modélisation des batteries
- Modélisation et Simulation dans le développement des piles à combustible
- Modélisation thermique des petits satellites
- Analyse électro-vibroacoustique d'un transducteur à armature équilibrée
Consultez les proceedings de la Conference COMSOL 2024
Glow corona discharges are generated from tall objects during thunderstorms previous to a lightning strike. These discharges generate space charge which can hinder the development of subsequent discharges. In order to quantify the shielding effect of positive glow corona, a transient, ... En savoir plus
Since October 2009 the laboratory of ATE has carried out collaborative research with the WTD 71 that aims for prediction, reduction and optimization of so-called underwater electric potential (UEP) signatures. COMSOL is used to simulate potential distributions in the context of impressed ... En savoir plus
Even though the researches in synchronous machines are advanced, the practical design still is a problem because of the complex interaction between several design parameters. The project “EaSync” at the Ostfalia University focuses on the bundling of machine models using COMSOL ... En savoir plus
3D FEM simulation of millimeter-scale, complex electro-optically induced waveguide based devices demands the use of grids with more than several million nodes. Hence the simulation could take substantial time and require large amounts of available memory. This paper presents a ... En savoir plus
Lorentz Force Velocimetry (LFV) is a non-contact measurement technique used to determine flow rates in electrically conducting fluids by exposing the flow to an external magnetic field and measuring the Lorentz force acting on the magnet system. Typically, for LFV applications real and ... En savoir plus
A simple magnetic circuit consisting of ferromagnetic core material, air gap, permanent magnets and current coils can be used to form magnetic actuators, motors etc. devices. In this work the current coils are not used to generate working magnetic field, but just to switch magnetic flux ... En savoir plus
Curved cone corrugated ground plane conical antenna has been designed and analyzed using Finite Element Method. In this paper, we introduce a novel Curved cone corrugated ground plane conical antenna for ultra-wideband (UWB) applications. The antenna is composed of curved cone with ... En savoir plus
The discharge properties in low pressure inductively coupled Ar/CH4 plasmas operating at an RF frequency of 13.56 MHz and total gas pressure of 20 mTorr are studied in this work. The calculation of gas flow is performed in coupling with the plasma simulation. The gas flow rate is varied ... En savoir plus
In principal, the calculation of the magnetic state inside a magnetic object requires the evaluation of the field in the entire unbounded space. With finite element methods restricted to finite domains, commonly auxiliary domains are employed which result in a non-physical cut-off. Not ... En savoir plus
Development of very high speed integrated circuits is currently of great interest for today\'s technologies. This paper presents the quasi-TEM approach for the accurate parameters extraction of multiconductor transmission lines interconnect in single, two, and three-layered dielectric ... En savoir plus